Irreversible discoloration design to ensure permanent preservation of temperature records, 85 ° C accurate temperature measurement point with 2x2cm circular patch, Pressure sensitive adhesive layer to achieve firm paste and its own protective film to enhance durability
The test bench has good anti-vibration performance, bearing weight of 80kg, angle adjustment range of 0-15 °, simple operation, and is suitable for mechanical Stability assessment of various household appliances.
The table diaMeter is 1000mm, the bearing capacity is 120kg, the angle adjustment range is 0-30 °, and the anti-vibration performance is good. It is suitable for mechanical Stability assessment of various household appliances.
The melting temperature error is only +/- 1 ° C, allowing for remote observation of the melting state. It can be directly pasted without complex installation and is suitable for temperature monitoring of a variety of electrical equipment.
The melting temperature error is only +/- 1 ° C, allowing for remote observation of the melting state. It can be directly pasted and used without complicated operation, and is suitable for temperature monitoring of various electrical equipment.
Measuring temperature 90 ℃ and the error is only +/- 1 ℃, the melting state can be observed at a distance, directly pasted and used to visually display the overheating of the equipment.
Irreversible monochrome discoloration design, permanent display after overheating, anti-fouling protective film provides waterproof and oil-proof performance, specification 2.5x4 cm, service life 3 years indoors and 2 years outdoors.
Vacuum principle measurement paper breathability performance, Measurement range 0-1000ml/min, test area of 10cm ², suitable for a variety of industrial paper mass detection.
4.0Mm diaMeter nickel-chromium wire ring, Temperature range 500~ 1000 ℃ adjustable, apply 0.8~ 1.2N force and limit the pressing depth of 7mm, automatic timing of ignition and extinguishing time, Thermocouple 1050 ℃ high temperature resistance.
The sampling size of the equipment is 300 * 320mm, and the parallelism of the incision is less than or equal to 0.1mm. It can accurately detect the mechanical properties such as paper tension resistance, elongation and fracture length, and meets the requirements of many national standards.
Measurement range 10~ 500mN, resolution 5mN, tear arm 104mm, paper size 25 * 15mm, suitable for accurate determination of paper Tear strength.
Table diaMeter 800mm, angle adjustment range 0-30 °, bearing capacity of 80kg, good anti-vibration performance, suitable for a variety of home appliances Stability test.
Using the Cobb test method, the test area is 100cm ² +/- 0.2, and the pressure roller mass is 10kg +/- 0.5, which is suitable for the detection of Water Absorbency on the surface of sizing paper and Cardboard, and is not suitable for loose or unsizing paper.
Measurement range 0-20mm, accuracy 0.001mm, contact pressure 20 +/- 5kPa, suitable for paper, Cardboard and sheet material Film thickness detection, in line with a number of international standards.
Adopt PLC + Touchscreen Control mode, flame height 12mm +/- 1mm adjustable, equipped with gas alarm and forced Air-Cooled system, three-dimensional adjustable fixture for easy observation and recording, stable and reliable.
