Overview
The LEEB leeb452 Roughness Gauge is a small, portable surface Roughometer for detecting asperity on the surface of machined parts, and can realize the acquisition, processing and display of asperity parameters. The instrument integrates microprocessor and sensing technology, uses a professional high-quality microprocessor and a highly integrated circuit design, and has an ultra-small architecture.
Features
1, accurate and reliable measurement, small size, easy to carry.
The technical parameters comply with GB/T 3505-2000 and GB/T 6062-2002 standards.
3, can be used for measurement of outer circle, cone, plane, can also measure the length and width of more than 80x30mm groove.
4. Adopt professional microprocessors and highly integrated circuit design.
Principle
The Roughness Gauge integrates microprocessor and sensing technology, uses piezoelectric crystal Sensor measurement surface profile, and processes and displays the acquired asperity parameters through a professional microprocessor.
Applications
Processing industry, testing, manufacturing, commodity inspection and other departments, especially suitable for on-site inspection of large workpieces and production lines
Standards
GB/T 3505-2000、GB/T 6062-2002
Steps
1. Connect the host and Power Adapter
2. Use multi-notch template to calibrate
3. Contact the Sensor with the surface to be measured for measurement
4. Read the Ra and Rz parameter values on the display screen
Notice
• Operating temperature range is 0 ° C-40 ° C
• Use a multi-notch template to calibrate before measurement
• Ensure that the surface to be tested is clean and free of impurities
• Charge in time when the battery is low
• Avoid severe impact or vibration of the instrument
