Overview
The Bante520-S Portable Conductivity Meter is a standard Portable device with a large LCD screen for outdoor measurement of liquid conductivity with a Measurement accuracy of 0.5% F.S. The meter supports 1 to 3 point button calibrating for setting Electrode constant and temperature compensation factor.
Features
1. Standard Portable Conductivity Meter with Large LCD
2.1 to 3 point button calibrated to automatically identify Conductivity detector standard
3. Optional Electrode constant (0.1/1/10), standardized temperature (20 or 25 ° C), linear/non-linear and pure water temperature compensation mode
4. Automatic temperature compensation to ensure accurate measurement over the full range
5. Automatic end point lock, keep stable Measured value for easy browsing or recording
6. The system menu can customize 10 function parameters such as the number of calibrated points, temperature unit, data locking mode, automatic shutdown, etc
7. One-click reset (Reset) automatically restores the meter to the factory default settings
8. Extended memory can store up to 100 sets of measurement data
9. USB Communication interface to send stored data to PC
10. Multi-mode power supply solution (battery, Power Adapter, USB port of computer) to ensure smooth application of the instrument
Principle
Conductivity detector Electrode measurement of liquid conductivity, using automatic temperature compensation technology to ensure measurement accuracy, support linear, non-linear or pure water compensation mode. Calibrating process using standard liquid for 1 to 3 point calibrating, automatic identification of standard liquid type.
Applications
Water quality monitoring, geological and ecological research, chilled down tower and boiler water, printing industry, swimming pools and spas, agriculture and aquaculture, aquariums, educational applications
Steps
1. Turn on the meter and select Measurement mode
2. Electrode constant, temperature compensation coefficient and number of calibrating points
3. Use standard solution for 1 to 3 point calibrating
4. Electrode immersion in the liquid to be tested begins measurement
5. Data can be automatically locked and stored after measurement
6. Export data to computer via USB interface
Notice
• Make sure Electrode is clean and not damaged before use
• Use the specified standard solution when calibrating and avoid contamination
• Electrode must be completely immersed in liquid for measurement
• Regularly check the battery level, low battery level may affect Measurement accuracy
• Memory capacity when storing data to avoid overflow
• Avoid use in extreme temperatures or Humidity environments
• Prevent violent vibration during transportation and storage
