Overview
The Bante530-S Portable Conductivity Meter is a High Accuracy portable device with TDS measurement, 1 to 5 point button calibrating and automatic temperature compensation. The meter is suitable for outdoor measurement of liquid conductivity and total dissolved solids (TDS) values with a Measurement accuracy of 0.5% F.S.
Features
1. High Accuracy Portable Conductivity Meter with Large Screen Backlit LCD
2.1 to 5 point button calibrated Conductivity detector standard
3. Optional Electrode constant (0.1/1/10), TDS factor, standardized temperature (20 or 25 ° C), linear and pure water temperature compensation mode
4. Automatic temperature compensation to ensure accurate measurement over the full range
5. Automatic end point lock, keep stable Measured value for easy browsing or recording
6. Electrode diagnostics, check Electrode slope value (K)
7. The system menu can customize 10 function parameters such as the number of calibrated points, Stability standard, data locking mode, and automatic shutdown
8. One-click reset (Reset) automatically restores the meter to the factory default settings
9. Extended memory can store up to 500 sets of measurement data
10. Built-in clock automatically marks the date and time of stored data to comply with GLP specifications
11. USB Communication interface to send stored data to PC
12. Multi-mode power supply solution (battery, Power Adapter, USB port of computer) to ensure smooth application of the instrument
Principle
Electrode measurement solution Conductivity detector reflects Ion concentration. Instrument measurement solution conductivity, used to judge water quality and concentration.
Applications
Water quality monitoring, geological and ecological research, chilled down tower and boiler water, printing industry, swimming pool and spa, agriculture and aquaculture, education and laboratory applications
Steps
1. Select Electrode Constant (0.1/1/10)
2. Perform 1 to 5 point button calibrating to automatically identify Conductivity detector standard solution
3. Set TDS factor, normalized temperature (20 or 25 ° C), linear or pure water temperature compensation mode
4. Start measurement, the instrument automatically performs temperature compensation
5. Automatic endpoint locking retains stable Measured value
6. Send the stored data to the personal computer via the USB interface
Notice
• Make sure Electrode Constant is set correctly before use
• The calibrating fluid must meet the specifications (10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88mS/cm, 111.8mS/cm)
• The temperature compensation range should be within 0~ 100 ℃
• The data storage capacity is 500 sets, pay attention to exporting the data in time
• Battery life is about 150 hours (when the LCD backlight is turned off)
• Electrode cleaning immediately after use
