Overview
The Bante530-DH Portable Conductivity Meter is a High Accuracy Portable conductivity /TDS meter with 1 to 5 point button calibrate and automatic temperature compensation. The meter is suitable for outdoor measurement of liquid conductivity and total dissolved solids (TDS) values with a Measurement accuracy of 0.5% F.S.
Features
1. High Accuracy Portable Conductivity Meter with Large Screen Backlit LCD
2.1 to 5 point button calibrated Conductivity detector standard
3. Optional Electrode constant (0.1/1/10), TDS factor, standardized temperature (20 or 25 ° C), linear and pure water temperature compensation mode
4. Automatic temperature compensation to ensure accurate measurement over the full range
5. Automatic end point lock, keep stable Measured value for easy browsing or recording
6. Electrode diagnostics, check Electrode slope value (K)
7. The system menu can customize 10 function parameters such as the number of calibrated points, Stability standard, data locking mode, and automatic shutdown
8. One-click reset (Reset) automatically restores the meter to the factory default settings
9. Extended memory can store up to 500 sets of measurement data
10. Built-in clock automatically marks the date and time of stored data to comply with GLP specifications
11. USB Communication interface to send stored data to PC
12. Multi-mode power supply solution (battery, Power Adapter, USB port of computer) to ensure smooth application of the instrument
Principle
The Conductivity Meter uses the Conductivity detector Electrode measurement of liquid conductivity and automatically converts to TDS value. Automatic temperature compensation technology ensures measurement accuracy, supports multiple compensation modes and Electrode constant selection, and performs data processing and storage through the built-in processor.
Applications
Water quality monitoring, geological and ecological research, chilled down tower and boiler water, printing industry, swimming pool and spa, agriculture and aquaculture, education and laboratory applications
Steps
1. Power on and select Measurement mode
2. Set Electrode constant, TDS factor, temperature compensation mode and other parameters as needed
3. Use standard solution for 1 to 5 point calibrating
4. Electrode immersion in the liquid to be tested
5. Record data after waiting for the Measured value to stabilize
6. Storage data can be exported via USB interface
Notice
• Please read the instructions carefully before use
• Conductivity detector standards specified should be used when calibrating
• Electrode fully immersed in liquid during measurement
• Electrode status and slope values are checked regularly
• Turn off the power when not in use for a long time
• Avoid violent vibration or impact of the instrument
• Keep Electrode Clean to Prevent Pollution
• Replace the battery in time when the battery is low
