Overview
The Bante530-DL Portable Conductivity Meter is a High Accuracy Portable meter with conductivity and TDS measurement capabilities. The meter supports 1 to 5 point button calibrating and is equipped with automatic temperature compensation for outdoor measurement of liquid conductivity and total dissolved solids (TDS) values. Measurement accuracy is 0.5% F.S.
Features
1. High Accuracy Portable Conductivity Meter with Large Screen Backlit LCD
2.1 to 5 point button calibrated Conductivity detector standard
3. Optional Electrode constant (0.1/1/10), TDS factor, standardized temperature (20 or 25 ° C), linear and pure water temperature compensation mode
4. Automatic temperature compensation to ensure accurate measurement over the full range
5. Automatic end point lock, keep stable Measured value for easy browsing or recording
6. Electrode diagnostics, check Electrode slope value (K)
7. The system menu can customize 10 function parameters such as the number of calibrated points, Stability standard, data locking mode, and automatic shutdown
8. One-click reset (Reset) automatically restores the meter to the factory default settings
9. Extended memory can store up to 500 sets of measurement data
10. Built-in clock automatically marks the date and time of stored data to comply with GLP specifications
11. USB Communication interface to send stored data to PC
12. Multi-mode power supply solution (battery, Power Adapter, USB port of computer) to ensure smooth application of the instrument
Principle
Conductivity detector Electrode measurement of liquid conductivity, and automatically converted to TDS value. Automatic temperature compensation technology to ensure the accuracy of measurement in different temperature environments. The system supports a variety of compensation modes and Electrode constant selection, through the automatic terminal lock function stable display measurement results.
Applications
Water quality monitoring, geological and ecological research, chilled down tower and boiler water, printing industry, swimming pool and spa, agriculture and aquaculture, education and laboratory applications
Steps
1. Turn on the meter power
2. Measurement mode (conductivity or TDS)
3. Set Electrode constant, temperature compensation mode and other parameters as needed
4. Electrode immersion in the liquid to be tested
5. Read the result after the Measured value is stable
6. Can choose to lock data manually or automatically
7. After the measurement is completed, the data can be stored or transferred to the computer through the USB interface
Notice
• Make sure Electrode is clean and free of contamination before use
• Conductivity detector standards specified should be used when calibrating
Avoid prolonged use in extreme temperature environments
• Electrode status is checked regularly and calibrated if necessary
• Please remove the battery when not in use for a long time
• Memory capacity limit when storing data
• Ensure a stable connection when transferring data using the USB interface
