Overview
The BANTE A150-S is a professional laboratory conductivity /TDS/salinity/resistivity meter with 5 measurement functions to measure liquid conductivity, total dissolved solids (TDS), salinity, resistivity and Conductivity detector ash score. The meter is equipped with a 7-inch TFT display, supports 1000 sets of data storage, and has a Measurement accuracy of 0.5% F.S.
Features
1. Professional Laboratory Conductivity Meter with 7-inch TFT Display
2. Support 1 to 5 point button calibrating, automatically identify Conductivity detector standard liquid
3. Optional Electrode Constant, Match Connected Conductivity detector Electrode and Call Sensor calibrate data
4. Optional linear temperature compensation coefficient, pure water compensation coefficient, standardized temperature and TDS conversion factor
5. Automatic temperature compensation ensures accurate measurement of full scale
6. Alarm limit function Automatic warning Measured value exceeds the set range
7. Calibrate expiration reminder function prompts regular calibrate
8. Automatic endpoint locking retains stable Measured value
9. Interval reading mode regularly sends data to the computer or printer
10. Password protection against unauthorized calibrating with settings
11. Extended memory to store 1000 sets of data
12. USB Communication interface to connect external devices
13. One-click reset automatically restores factory default settings
Principle
The meter uses the Conductivity detector Electrode measurement liquid Conductivity detector characteristics, combined with the temperature sensor for automatic temperature compensation, using the built-in algorithm to calculate conductivity, TDS, salinity, resistivity and Conductivity detector ash value. Support manual or automatic temperature compensation mode to ensure measurement accuracy under different temperature conditions.
Applications
Laboratory, water quality monitoring, industrial process control, environment monitoring, food and beverage industry, pharmaceutical industry
Steps
1. Connect Conductivity detector Electrode and temperature probe
2. Power on and select Measurement mode
3. Perform 1 to 5 point calibrating (optional)
4. Set temperature compensation parameters
5. Electrode immersion in the liquid to be tested
6. Read and record Stable Measured values
7. Use the USB interface to transfer data (optional)
8. Regular calibrated maintenance
Notice
• Make sure Electrode is clean and free of contamination before use
• The specified standard solution should be used when calibrating
• Avoid Electrode Exposure to Air for a Long Time
• Regularly check the calibrated condition
• Electrode moisture during storage
• Power supply with designated Power Adapter
• Avoid drastic temperature changes affecting measurement
• Measurement range to prevent over-range use
