Overview
The BANTE A150-DL is a professional laboratory conductivity /TDS/salinity/resistivity meter with 5 measurement functions to measure liquid conductivity, total dissolved solids (TDS), salinity, resistivity and Conductivity detector ash score. The meter is equipped with a 7-inch TFT display, supports 1000 sets of data storage, and has a Measurement accuracy of 0.5% F.S.
Features
1. Professional Laboratory Conductivity Meter with 7-inch TFT Display
2.1 to 5 point button calibrated Conductivity detector standard
3. Optional Electrode Constant, Match Connected Conductivity detector Electrode and call calibrate data
4. Optional linear temperature compensation coefficient, pure water compensation coefficient, standardized temperature and TDS conversion factor
5. Automatic temperature compensation to ensure accurate measurement of full scale
6. Alarm limit function, automatic warning Measured value exceeds the set range
7. Calibrate expiration reminder, prompting users to calibrate regularly
8. Automatic end point lock, retain stable Measured value
9. Interval reading mode, send data to computer or printer regularly
10. Password protection to prevent unauthorized calibrating and setting
11. Extended memory to store 1000 sets of data
12. USB Communication interface Easy to connect external devices
13. One-click reset automatically restores factory default settings
Principle
Conductivity detector Electrode measurement of liquid conductivity and calculation of TDS, salinity, resistivity and Conductivity detector ash based on conductivity value. Automatic temperature compensation technology ensures measurement accuracy through linear or nonlinear compensation mode, supports standardized temperature setting and Electrode constant matching.
Applications
Laboratory, water quality monitoring, industrial process control, environment monitoring, food and beverage industry, pharmaceutical industry
Standards
Practical salinity (psu), seawater salinity (ppt),% salinity
Steps
1. Connect Conductivity detector Electrode and temperature probe
2. Select Measurement mode (conductivity /TDS/salinity/resistivity/Conductivity detector ash)
3. Electrode constant and temperature compensation parameters
4. Perform 1-5 point calibrating (optional)
5. Electrode immersion in the liquid to be tested
6. Measured value after reading stability
7. Store or export data as needed
Notice
• Make sure Electrode is clean and free of contamination before use
Periodically calibrated to ensure measurement accuracy
• Avoid Electrode Exposure to Air for a Long Time
• Conductivity detector calibrated with specified standard solution
• Pay attention to calibrate expiration reminders and deal with them in time
• Keep the meter drying during storage
• Use only original accessories and adapters
