Overview
The BANTE A150-DH is a professional laboratory conductivity /TDS/salinity/resistivity/Conductivity detector ash meter with a 7-inch TFT display. The meter can measure liquid conductivity, total dissolved solids (TDS), salinity, resistivity and Conductivity detector ash scores. Measurement accuracy of 0.5% F.S., support 1000 sets of Data storage, suitable for a variety of laboratory application scenarios.
Features
1. Professional Laboratory Conductivity Meter with 7-inch TFT Display
2. Support 1 to 5 point button calibrating, automatically identify Conductivity detector standard liquid
3. Optional Electrode Constant, Match Connected Conductivity detector Electrode and Call Sensor calibrate data
4. Optional linear temperature compensation coefficient, pure water compensation coefficient, standardized temperature and TDS conversion factor
5. Automatic temperature compensation ensures accurate measurement of full scale
6. Alarm limit function Automatic warning Measured value exceeds the set range
7. Calibrate expiration reminder function prompts regular calibrate
8. Automatic endpoint locking retains stable Measured value
9. Interval reading mode regularly sends data to the computer or printer
10. Password protection against unauthorized calibrating with settings
11. Extended memory to store 1000 sets of data
12. USB Communication interface for easy connection of peripherals
13. One-click reset function restores factory default settings
Principle
The meter uses automatic temperature compensation technology to ensure measurement accuracy by connecting the Conductivity detector Electrode measurement characteristics of the solution. Manual or automatic temperature compensation mode is supported, and accurate measurement is achieved through Electrode constant matching and standard liquid calibrating. The end value is automatically locked after the data is stabilized.
Applications
Laboratory, water quality monitoring, industrial process control, environment monitoring, food and beverage industry, pharmaceutical industry
Standards
Conductivity Measurement accuracy +/- 0.5% F.S, TDS Measurement accuracy +/- 1% F.S, salinity Measurement accuracy +/- 1% F.S, Resistivity Measurement accuracy +/- 1% F.S, Conductivity detector Ash Measurement accuracy +/- 1% F.S, Temperature Measurement accuracy +/- 0.5 ℃
Steps
1. Connect the Power Adapter and turn it on
2. Select the appropriate Conductivity detector Electrode and connect
3. Electrode Constant and Measurement parameters
4. Perform 1-5 point calibrating operation
5. Electrode immersion in the solution to be tested
6. Measured value is stable and automatically locked
7. Read and record measurement data
8. Use the USB interface to transfer data to external devices
Notice
• Please read the instructions carefully before use
Periodic instrument calibration to ensure measurement accuracy
• Conductivity detector for calibrating
• Avoid Violent Collision or Contamination of Electrodes
• Electrode fully immersed in solution during measurement
• Pay attention to calibrate expiration reminders and deal with them in time
• Clean Electrode in time after use and store it properly
• Use only original parts and standard fluids
