Overview
YIHENG SX2-8-10NP intelligent muffle furnace is a high temperature intelligent box muffle furnace with multi-stage programmable control. The design temperature can reach 1000 ° C. It is suitable for high temperature heat treatment and high temperature heating in laboratory or industry. The input power of this product is 8KW, the volume is 16L, and the heating element wirecoil for heater and refractory brick furnace are used.
Features
1, using a programmable controller, there are 30 programs, each segment can be set to heat up or stay, and provide programmed temperature, time, Heating power cycle.
2. Through multi-stage programmable control, simplify the complex test process and realize automatic control and operation. The door liner and box panel are made of stainless steel, which has the advantages of corrosion resistance and high temperature invariance.
3. The unique furnace door design makes it easy and safe to open the door, ensuring that the high-temperature hot air in the furnace does not leak out.
4. With microcomputer PID controller control, accurate and reliable temperature control, easy to operate.
5, door sealing is good, heat is not easy to lose, furnace temperature to maintain good uniformity.
Principle
The product precisely controls the heating element of the wirecoil for heater through a microcomputer PID controller to achieve temperature setting, heating and thermostatic. Its multi-stage programmable function allows users to preset complex temperature-time Linear dispersion, and the controller automatically executes the program to complete the heating, holding and chilling down.
Applications
Laboratory high temperature heat treatment, industrial high temperature heating
Steps
1. Connect the power supply and turn on the power switch of the device.
2. Set the required temperature program (up to 30 segments) through the microcomputer PID controller, including the temperature target, heating rate, and holding time for each segment.
3. After confirming that the program settings are correct, start the program and the device starts to run automatically.
4. After the program runs, the device stops heating or enters standby state according to the setting.
5. After the furnace temperature drops to a safe range, use a special tool to open the furnace door and take out the sample.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
• Power supply voltage meets equipment requirements before operation.
• When the furnace body is running at high temperature, do not touch the surface of the furnace body to prevent burns.
• The door opening operation should be carried out after the furnace temperature drops to a safe range to avoid high temperature hot gas burns.
• Do not heat flammable, explosive or toxic items in the furnace.
• Regularly check the power cord and various components of the equipment to ensure that the connection is firm and not damaged.
When the device is not in use, please cut off the power supply.
