Overview
The PosiTector 200 D1 is an ultrasonic Coating thickness gauge from the Defelsko brand. It is designed for non-metallic substrates and provides nondestructive measurement of Coating thickness in wood, concrete, plastics and other materials. It uses proven ultrasound technology, advanced models can measure up to three-layer coating systems, and has a variety of connectivity and data management functions.
Features
1. Technology mature: using ultrasonic technology, nondestructive measurement of a variety of applications, advanced models can be measured up to three coatings.
2. Easy measurement: Most applications do not need to be calibrated, enhancing one-handed menu navigation and flashing display.
3. Good protection: weatherproof design, resistant to solvents, acids, oils, water and dust, with shock-absorbing protective rubber leather case.
4. High compatibility: With the PosiTector interchangeable platform, Probe can be connected to a single meter body.
5. Link valid: Supports USB, WiFi and Bluetooth connections, compatible with PosiSoft PC, Mac and smartphone software.
6. With calibrated certificate: The calibrated certificate can be traced back to NIST or PTB.
7. Accurate and reliable: The Response Sensor provides fast and accurate readings, meeting ASTM D6132 and ISO 2808 standards.
8. Multifunctional display: high contrast ratio backlit display, unit can be switched, support multiple languages and flip display.
9. Powerful statistics: Statistical mode displays average, Standard Deviation, minimum/maximum thickness and readings, supports Data storage and screen capture.
10. Flexible power supply: use alkaline batteries or rechargeable batteries, built-in charger.
Principle
The PosiTector 200 D1 uses ultrasonic technology to transmit and receive ultrasonic signals through the Sensor for nondestructive measurement of Coating thickness on Non-metallic substrates. The technology is based on the propagation characteristics of sound waves in materials, ensuring fast and accurate thickness readings in line with relevant international standards.
Applications
Wood, plastic and other polymer coatings, concrete, fiberglass and other coatings, thick and soft coatings such as polyurea, asphalt neoprene, very thick polymers
Standards
ASTM D6132、ISO 2808
Steps
1. Prepare for measurement: Most applications do not need to be calibrated and used directly.
2. Turn on the device: Power Supply switch to start the thickness gauge.
3. Select Settings: Switch units (μm/mils), languages, etc. as needed.
4. Perform measurements: Place the Probe on the coating surface to obtain a thickness reading.
5. View statistics: View averages, Standard Deviations, and other data in real time in statistical mode.
6. Store data: Automatically store measurement results, each reading is marked with a date and time.
7. Data transfer: Connect to PC via USB port, use software for Data analysis and reporting.
Notice
- Ensure that the equipment is used in a weatherproof environment to avoid extreme conditions affecting performance.
- Check the calibrated status before use and refer to the calibrated certificate if necessary.
Avoid contact with sharp objects to prevent damage to the Sensor.
- Improve visibility in noisy environments with flashing displays.
- Regularly update the software to ensure that the device features are up to date.
- Pay attention to backup when storing data to prevent data loss.
- Use compatible battery types to avoid malfunctions caused by improper power supplies.
