Overview
The LANYU 24G Dispersion Head is a Homogenizer Optional accessory, made of 316L stainless steel. Its Stir range is 80-5000ml, and the maximum viscosity can be processed is 5000mPa.s.
Features
1. Stir a wide range, covering 80-5000ml
2. High viscosity processing capacity, up to 5000CP
3. High temperature resistant design, maximum operating temperature 120 ° C
4. High-quality 316L stainless steel working head material
5. PTFE bushing material
6. The maximum linear speed of the rotor is 18m/s
7. Immersion liquid height range 50-165mm
8. stirringrod length 225mm, stator diameter 24mm
Principle
The dispersion head generates shear force through high-speed swirl/spin to homogenize the material between the stator and the rotor. The maximum linear speed of the rotor can reach 18 m/s, enabling efficient mixing of liquids in the range of 50-165 mm immersion heights.
Applications
Homogeneous dispersion, high viscosity material handling, laboratory research, industrial production
Steps
1. Choose the appropriate Stirring amount range (80-5000ml) according to the material characteristics
2. Ensure that the immersion liquid height is within the range of 50-165mm
3. Set the appropriate speed, noting that the maximum linear speed of the rotor is 18m/s
4. Start the equipment for homogeneous and decentralized operation
5. Clean and maintain in time after the operation is completed
Notice
• The operating temperature shall not exceed 120 ° C
• The height of the immersion liquid must be kept within the range of 50-165mm
• Material viscosity should not exceed 5000CP
• Regularly check the abrasion of the working head and bushing
• Make sure all parts are firmly installed before operation
