Overview
DNP-9052E electric thermostatic incubator is a laboratory equipment using microcomputer intelligent temperature control. The box is made of thin steel plate, and the studio is made of stainless steel plate. It has a dual digital display function for setting and measuring temperature. Temperature range is room temperature + 5 ° C to 65 ° C.
Features
1. The box is made of high-quality thin steel plate.
2. Microcomputer intelligent temperature controller with dual digital display and PID self-tuning function for setting and measuring temperature.
3. The studio material is made of good stainless steel plate.
4. Using external heating type, forced convection ventilation type structure, Temperature uniformity is good.
5. Double door structure inside and outside, with small temperature fluctuation. The outer door adopts a fully transparent observation window type, and the internal items are clear at a glance.
Principle
The incubator adopts an external heating design, which circulates the air in the working room through a forced convection ventilation structure to achieve a uniform temperature distribution. The microcomputer intelligent temperature controller precisely controls the heating element through the PID self-tuning algorithm to maintain the set constant temperature.
Applications
Laboratory fostering, biological experiments, thermostatic storage of samples
Steps
1. Place the equipment in a smooth, well-ventilated environment.
2. Connect the 220V 50Hz power supply.
3. Set the required temperature through a microcomputer thermostat.
4. Place the items to be fostered on the shelves of the studio.
5. Close the inner and outer doors and start the device to work.
6. You can check the internal situation at any time through the transparent observation window.
7. After use, turn off the power and remove the item.
Notice
• Power supply voltage 220V 50Hz and reliable connection.
Equipment should be placed in a stable, well-ventilated position.
• Do not exceed the specified Temperature range (RT + 5-65 ℃).
• When placing items, do not block the internal ventilated circulation channel.
When cleaning, please disconnect the power supply first.
• Regularly check the operating status of the equipment.
