Overview
RONGHUA INSTRUMENT DNP-9052-1A electrothermal thermostatic incubator is a vertical device, suitable for the storage of bacteria and biological foster in **, biological, agricultural, scientific research and other departments. The box is sprayed with good steel plate, and the inner door is tempered Glass, which is convenient for observing foster items; The studio is made of stainless steel plate, and the shelf can be moved and adjusted in height. The device is equipped with flat heater, low noise fan and silicone rubber sealing ring to ensure temperature uniformity and sealing. The temperature controller has High Accuracy digital display and tracking alarm function.
Features
1. Vertical design, the box body and the outer box door are sprayed with good steel plate, and the inner door is tempered Glass, which is easy to observe.
2. The studio is made of stainless steel plate, the shelf can be moved and the height can be adjusted arbitrarily.
3. Equipped with silicone rubber sealing ring to ensure the sealing of the inner door and studio.
4. Three flat panel heaters are installed on the left, right and bottom, and a low-noise small fan is installed at the top to ensure uniform temperature.
5. Glass cotton insulation is filled between the box shell and the studio.
6. Temperature Controller with High Accuracy Digital Display, Set Temperature Protection Device and Tracking Alarm Function.
7. The power switch, indicator light and temperature controller are all set in the upper part, making it easy to operate.
Principle
The electric thermostatic incubator is heated by a flat panel heater on the outer wall of the studio, and the top fan blows a slight air flow to ensure an even distribution of temperature in the box. The temperature controller precisely controls the temperature, with digital display and tracking alarm function, to maintain the set temperature within a stable range.
Applications
**, biology, agriculture, scientific research
Steps
1. Connect the power supply and turn on the power switch.
2. Set the required temperature through the thermostat.
3. Place foster items on the studio shelf.
4. Close the inner and outer doors and ensure sealing.
5. Monitor the temperature in the box and adjust the settings if necessary.
6. Turn off the power after use and remove the item.
Notice
- Power frequency check meets 220V 50Hz requirement before use.
- Pay attention to the protective device when setting the temperature to avoid misoperation.
- Regularly check the sealing ring and heater to ensure the normal operation of the equipment.
- Avoid use in hot or humid environments to prevent damage.
- Disconnect power when cleaning and wipe with a soft cloth.
