Overview
JINGQI DNP-9272E Thermostatic Incubator is a microcomputer intelligent temperature control laboratory equipment with a Temperature range of + 5 to 65 ° C and a Temperature Fluctuation of +/- 0.5 ° C. The cabinet is made of thin steel plate, the studio is made of good stainless steel plate, and the external heating and forced convection ventilation structure is used to ensure Temperature uniformity.
Features
1. The box is made of high-quality thin steel plate.
2. Microcomputer intelligent temperature controller with dual digital display and PID self-tuning function for setting and measuring temperature.
3. The studio material is made of good stainless steel plate.
4. Using external heating type, forced convection ventilation type structure, Temperature uniformity is good.
5. Double door structure inside and outside, with small temperature fluctuation. The outer door adopts a fully transparent observation window type, and the internal items are clear at a glance.
Principle
The incubator adopts external heating mode, which circulates the air in the working room through a forced convection ventilation system to ensure uniform temperature distribution. The microcomputer intelligent temperature controller monitors and adjusts the temperature in real time, and uses the PID self-tuning algorithm to precisely control the Heating power to maintain the set constant temperature.
Applications
Biological foster, cell foster, microbial foster, seed germination experiment, material aging test
Steps
1. Place the equipment in a smooth, well-ventilated environment.
2. Connect the 220V 50Hz power supply.
3. Turn on the power switch.
4. Set the required temperature through a microcomputer thermostat.
5. Place the items to be fostered on the shelves of the studio.
6. Close the inner and outer doors and the equipment starts to work.
7. You can check the internal situation at any time through the transparent observation window.
8. After use, turn off the power.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
• Use the specified 220V 50Hz Power supply voltage.
• Do not operate above the maximum rated Temperature range of 65 ° C.
• When placing items, make sure that it does not interfere with the internal air circulation.
• Regularly clean the studio and keep the equipment clean.
• Please pay attention to safety during operation to avoid burns.
