Overview
BENTING CBGDW-100L low/high temperature test chamber is a professional Environmental performance equipment, suitable for product performance testing under high and low temperature conditions. Temperature range is -40 ℃ to 150 ℃, Inner chamber dimensions are 500 * 500 * 400mm, volume is 100L, using advanced refrigeration and control system to ensure accurate and stable temperature.
Features
1. The outer box is made of cold plate paint, the inner wall is good mirror stainless steel plate, and the thermal insulation material is fiberglass.
2. Single open hinged door design, equipped with observation window, lighting and anti-condensation electric heating device.
3. Control panel integrated controller display, U disk interface, RS232 communication interface, power switch, status indicator and sound and light alarm.
4. The unit includes refrigeration unit, water tray, drain hole, condenser fan, condenser inlet trend and supply water tank.
5. The power distribution system includes IO boards, machine tool transformers, ballasts, relays, contactors, fuses, and other components.
6. The control system automatically adjusts the operation of the refrigerator to achieve energy saving, and the cooling capacity of the evaporator is switched through the solenoid valve.
7. Adopt fully enclosed low-noise rotor Compressor and air-cooled heat exchanger, and the working mode is binary cascade refrigeration.
Principle
The low/high temperature test chamber realizes temperature control through the refrigeration system and the heating system. The refrigeration system adopts the binary cascade refrigeration method, which is composed of a fully enclosed low-noise rotor Compressor and an air-cooled heat exchanger. The control system drives the solenoid valve to switch the evaporator cooling capacity. The heating system adjusts the humidity through the humidifier power of 2.5KW. The control system automatically adjusts the operating state according to the set conditions to ensure that the Temperature Fluctuation is ≤ 0.5 ° C and the uniformity is ≤ 2.0 ° C.
Applications
Electronics, automotive parts, materials research, aerospace components, chemical products
Steps
1. Turn on the power switch and start the device.
2. Set the required temperature range and Miscellaneous parameters through the controller display.
3. Use a USB stick or RS232 interface to connect to a computer for data communication.
4. Monitor status indicators and alarm devices to ensure normal operation.
5. After the test is completed, turn off the power and clean the equipment.
Notice
• Prohibit testing of products that may produce flammable, explosive, volatile, highly toxic, corrosive, and radioactive substances.
• Avoid opening and closing doors frequently when the equipment is running to prevent temperature fluctuations.
• Regularly check the refrigeration unit and power distribution system to ensure safe operation.
• Before use, confirm that the Power frequency meets the requirements to prevent electrical failure.
