Overview
TAISITE DH43L Electric heated incubators of constant temperature is a thermostatic device with heating plate heating mode, with uniform temperature distribution. Its mirrored stainless steel liner is easy to clean and maintain, the outer door is made of carbon steel plate lame plating, and the inner door is designed with reinforced Glass for easy observation of experimental conditions. The product supports constant operation, timing operation and automatic stop function, which is suitable for a variety of thermostatic foster needs.
Features
1. Heating mode with heating plate, temperature distribution is more uniform.
2. Mirror stainless steel liner, easy to clean and maintain.
3. The high-end equipment is equipped with lighting, ultraviolet sterilization, overlift prevention, inflatable port, etc., to meet the various needs of customers.
4. Outer door carbon steel plate lame plating, inner door reinforced Glass, easy to check the experimental status at any time.
5. Convenient operation, fixed-value operation, regular operation, automatic stop.
6. Dedicated function keys to achieve temperature setting.
7. Auxiliary menu to achieve over-rise alarm, deviation correction, menu lock.
8. Pull-out Shelf, easy to take samples.
9. Glass inner door structure designed, easy to switch, feel comfortable.
10. Safety: over-temperature alarm, over-rise preventer.
Principle
Electric heated incubators of constant temperature use a heating tube as a heater, and achieve accurate temperature control through PID temperature Control mode. The temperature sensor pt100 monitors the temperature in the box, and the system automatically adjusts according to the deviation of the set value and the actual temperature to ensure that the Temperature Fluctuation is within +/- 0.5 ° C. The thermostatic method is natural convection, and the heating plate heats to make the temperature distribution more uniform and achieve a stable thermostatic effect.
Applications
Thermostatic fostering, experimental research, microbial fostering, cell fostering, sample preservation
Steps
1. Turn on the power supply and turn on the device switch.
2. Use the touch of four buttons to set the desired temperature.
3. Select the operation mode: fixed-value operation, regular operation or automatic stop.
4. Set the timer time as needed (0-9999 minutes or hours).
5. Start the device and start thermostatic operation.
6. Monitor the actual temperature and set temperature through the LCD display.
7. After the operation is completed, the device automatically stops or is manually shut down.
Notice
• Power supply voltage is AC 220V/50-60Hz before use to avoid voltage mismatch.
• Regularly clean the mirror stainless steel liner to maintain hygiene.
• Over-temperature alarm and over-rise preventer are safety devices and should not be disabled at will.
• Load per shelf no more than 15kg to prevent overload damage.
• Do not switch the inner door frequently when the equipment is running, so as not to affect the temperature Stability.
• If you need UV sterilization function, please confirm the equipment in the high-end model.
• When not in use for a long time, disconnect the power supply and maintain the drying environment.
