Overview
TAISITE DH49D Electric heated incubators of constant temperature is a laboratory equipment with heating plate heating mode and uniform temperature distribution. Its mirror stainless steel liner is easy to clean and maintain, the outer door is carbon steel plate lame plating, and the inner door is reinforced Glass, which is convenient for observing the experimental state. The product has convenient operation functions such as fixed value operation, timing operation, automatic stop, and can be optionally equipped with lighting, ultraviolet sterilization, over-lift prevention, inflatable port and other configurations to meet different needs.
Features
1. Heating mode of heating plate, temperature distribution is more uniform.
2. Mirror stainless steel liner, easy to clean and maintain.
3. The high-end model can be equipped with lighting, ultraviolet sterilization, over-lift prevention, inflatable port and other functions.
4. Outer door carbon steel plate lame plating, inner door reinforced Glass, easy to check the experimental status at any time.
5. Easy to operate, support fixed-value operation, regular operation, and automatic stop.
6. Dedicated function keys to achieve temperature setting.
7. The auxiliary menu supports over-rise alarm, deviation correction, and menu lock.
8. Pull-out Shelf, easy to take samples.
9. Glass inner door structure designed, easy to switch, feel comfortable.
10. With over-temperature alarm, over-rise preventer and other safety devices.
Principle
The incubator uses natural convection method for thermostatic. Through PID Temperature Control mode, the heating tube is used as the heating device to heat the air in the box. The temperature sensor (pt100) monitors the temperature in the box in real time and feeds the data back to the Control system. The PID algorithm precisely adjusts the Heating power to achieve stable control within the set Temperature range. Temperature Fluctuation is +/- 0.5 ° C and distribution accuracy is +/- 1 ° C.
Applications
Laboratory thermostatic foster, microbial foster, cell foster, sample preservation, environmental testing
Steps
Connect the power supply (AC 220V/50-60Hz).
2. Set the desired temperature (RT + 5~ 65 ° C) by tapping the four buttons.
3. Select the operation mode: fixed-value operation, regular operation (0-9999 minutes or hours), or automatic stop.
4. If you need to use it, you can set deviation correction or menu lock through the auxiliary menu.
5. Put in the sample and close the inner and outer doors of the Glass.
6. The equipment starts to work, and the experimental state can be observed through the Glass door.
7. After the operation is completed, the device will automatically stop or issue a prompt according to the settings.
Notice
* Power supply voltage meets requirements (AC 220V) before use.
* Load per shelf (15kg).
* When the equipment is running, do not frequently open and close the box door, so as not to affect the temperature Stability.
* When cleaning the liner, use a soft cloth to wipe the mirror stainless steel surface.
* If you need to use the UV sterilization function (high-end model), please pay attention to safety protection and avoid looking directly at the UV light source.
* The equipment is equipped with an over-temperature alarm and over-rise preventer, but it is still necessary to regularly check whether its function is normal.
* For advanced settings such as deviation correction, please refer to the manual.
The exhaust port of the equipment is located at the top, please ensure that it is unobstructed when using it.
* When moving or handling equipment, please pay attention to safety, Net weight 33kg.
