Overview
CHNSPEC CS-660A Colorimeter uses D/8 lighting geometry and CLEDs Illuminant, with large LCD display and ergonomic design. The built-in software is powerful, including a variety of color equations and Standard light sources, and has obtained national first-class metrology authentication. It is suitable for color measurement in factories, laboratories and other occasions.
Features
1. Adopt international general D/8 lighting geometry SCI/SCE compatible lighting observation conditions
2. Provide up to three years of quality assurance in the industry
3. Color analysis software is standard, which supports Color data management and test report generation
4. Each instrument is subject to national Measurement verification, and the data can be Traceability
Standard light sources and nearly 40 chroma indicators
6, built-in camera view, can clearly observe the measurement area
7. Optional Colorschemer studio to optimize recipe calculation and save costs
Principle
The instrument adopts CLEDs full-band equalized LED Illuminant and ETC real-time calibrating technology, and conducts spectroscopic measurement through SCS Optical inspection engine. Automatic Gloss compensation technology ensures the accuracy of Color measurement on different Gloss surfaces, and the illumination mode is d/8 scattering Illuminant with 8 degree observation angle.
Applications
Plastics, paints, printing, food, Spinning & weaving, printing and dyeing
Standards
National level metrology authentication
Steps
1. Use the pre-positioning plate to calibrate
2. Observe and locate the measurement area through the camera
3, start measurement, the instrument automatically completes the test
4. View measurement data on the display or generate reports
Notice
• Avoid operating in high temperature and high humidity environment, ensure Ambient Temperature 0-45 ℃ and relative humidity does not exceed 80%
• Regularly check the instrument for cleanliness to prevent fouling from affecting measurement accuracy
• Use a dedicated DC adapter or a removable lithium battery for power supply to ensure stable power supply
• Avoid extreme temperatures during storage, the environment should be kept at -25~ 55 ° C and no water condensation
