Overview
Sanenchi YS3010 grating Colorimeter is a China grating Colorimeter independently developed by 3nh with complete independent intellectual property rights. It is cost-effective, with a diameter of φ 8mm, good Test accuracy, and relatively large storage space, which can meet the needs of most customers. The Colorimeter is widely used in color difference quality control of various products. It is equipped with high-end Color management software and is connected to a computer to achieve more function expansion.
Features
1. D/8 geometrical optics structure, in line with CIE No. 15, GB/T 3978, GB 2893, GB/T 18833, ISO7724/1, ASTM E1164, DIN5033 Teil7;
2. Combination LED Illuminant with High Life and Low Power Consumption;
3. Appearance and structural design in line with human mechanics are well combined.
4. Standard diameter of φ 8mm, suitable for more samples to be tested; simultaneous measurement of SCI and SCE;
5. Light spectrum measurement, Lab data accuracy, can be used for color scheme and accurate Color transmission;
6. High electronic hardware configuration: 3.5-inch TFT true color screen, capacitive Touchscreen, concave grating, 256-pixel dual-array CMOS detector, etc.
7, USB/Bluetooth 4.0 dual communication mode (compatible with 2.1), wider adaptability;
8. Standard whiteboard with super dirt resistance, stability and high reflectance;
9. Large-capacity storage space, capable of storing more than 20,000 pieces of test data.
10. Camera viewing and positioning;
11. PC-side software has powerful functional extensions.
12. Two standard viewing angles, various Illuminants, various Color indicators, in line with various standard Chroma data.
Principle
YS3010 Colorimeter adopts D/8 geometrical optics structure, through the combination of LED Illuminant irradiation sample, using concave grating spectroscopy to analyze the reflected light into Light spectrum, received and analyzed by 256 pixel dual-array CMOS detector, while measuring SCI and SCE data, to achieve accurate Color measurement and color difference analysis.
Applications
Plastic electronics, paints inks, Spinning & weaving garment printing and dyeing, printing paper products, automobiles, cosmetics, food, scientific research institutions, laboratories
Standards
CIE No.15、GB/T 3978、GB 2893、GB/T 18833、ISO7724/1、ASTM E1164、DIN5033 Teil7
Steps
1. Turn on and select Operating language;
2. Locate the measurement area through the camera;
3. Measurement mode (single measurement or average measurement);
4. Select Viewing Angle and Illuminant;
5. Conduct sample measurement;
6. View and store measurement data;
7. Data analysis and function expansion can be performed by connecting the computer via USB or Bluetooth.
Notice
• Operating Ambient Temperature should be kept within the range of 0~ 40 ℃
• relative humidity should not exceed 85%, avoid condensation
• The altitude of use should be less than 2000 meters
• Storage ambient temperature range -20~ 50 ℃
• Avoid long-term use in humid or high temperature environments
• Regularly calibrate instruments to ensure Measurement accuracy
• Make sure the connection is stable when using the supporting software
