Overview
TS20 is a Portable spectroscopic color difference meter developed by 3nh using its own spectroscopic core technology. It adopts a spectroscopic architecture to ensure accurate relative value Delta E and absolute value L, A, B long-term accuracy, and can pass international and national standards for Measurement at any time. Built-in silicon photodiode array (double row 24 groups) sensor, imported whiteboard, Repeatability Delta E * ab control within 0.08, taking into account Measurement speed and operation convenience, can be connected to PC-side quality control software, 8mm measurement diameter to meet the plastic electronics, paints inks, Spinning & weaving garment printing and dyeing, printing, ceramics and other industries Precise color difference control.
Features
8 mm measurement diameter, 10 ° observer angle, to meet the needs of most industry customers;
2. Combination of Full Light spectrum LED Illuminant, Planar Grating Spectroscopic, True Color Capacitive Touchscreen, High starting point configuration;
3, silicon photodiode array (dual 24 groups) sensor, display accuracy 0.01, Repeatability is good;
4. Illuminant life 5 years is greater than 3 million measurements, lithium battery 6000 measurements within 8 hours, can be recharged repeatedly and has a long battery life;
Data storage master standard 500, 10,000 samples, fast data search, analysis and comparison.
Principle
The TS20 color difference meter adopts D/8 illumination mode (diffuse illumination, 8 ° direction reception), using a combination of full-spectrum LED Illuminant and planar grating spectroscopy technology to detect Reflection spectrum through a silicon photodiode array (dual column 24 groups) sensor to achieve Color measurement. Innovative ETC real-time calibrating technology ensures accuracy and Repeatability for each test, with a measurement Wavelength range of 400~ 700nm and a Light spectrum Half Bandwidth of 10nm.
Applications
Plastic electronics, paints inks, Spinning & weaving garment printing, printing, ceramics
Standards
CIE No.15、GB/T 3978、GB 2893、GB/T 18833、ISO7724-1、ASTM E1164、DIN5033 Teil7
Steps
1, single measurement or average measurement (2~ 99 times) mode selection;
2. Use a stabilizer to locate the sample.
3. Set parameters through True Color Capacitive Touchscreen;
4. Perform measurements to display reflectance, chromatic value, color difference value and other results;
5. Data storage and PC software analysis through USB interface.
Notice
• Operating Ambient Temperature 0~ 40 ℃, Humidity 0~ 85% RH (no condensation), altitude below 2000m;
• Storage Ambient Temperature -20~ 50 ℃, Humidity 0~ 85% RH (no condensation);
• Avoid direct light and violent vibration;
• Regularly calibrate instruments to ensure accuracy;
• Use imported standard whiteboards, which are resistant to yellowing, can be wiped, and kept clean.
