Overview
The 3nh NS810 Colorimeter is a vertical handheld colorimeter with D/8 lighting, a 58mm large integrating sphere and a combined LED Illuminant, which can receive a wider range of reflected light, reduce color measurement errors and improve Measurement accuracy. The instrument is equipped with a USB interface and color analysis software, which can be connected to computer operation data, and the side test buttons are ergonomic.
Features
1. Appearance beautiful shape
2. Standard D/8 ° lighting method conforms to CIE No.15 and GB/T 3978 standards
3.3.5 inch capacitive Touchscreen pure screen design, Operating interface friendly
4. Two Standard Observer angles, a variety of Illuminant modes and color systems to meet various Color measurement needs
5. Sexual repeability accuracy Within 0.04, Inter-instrument Agreement Within 0.02
6. Large-capacity storage space, capable of storing more than 1,000 test data
7. Powerful PC-side software
8. High hardware configuration, incorporating a number of innovative technologies
9. Large integrating sphere effectively homogenizes the rays of light, and the measurement data is more accurate
10.15 ° screen tilt angle conforms to human eye observation habits
Principle
Using D/8 ° (diffuse reflection uniform illumination 8 ° reception) illumination, the sample is irradiated by a combination of LED Illuminant, a silicon photodiode sensor receives the reflected light, in the 400~ 700nm Wavelength range at 10nm intervals measurement reflectance, calculated various Color parameters and color difference data.
Applications
Spinning & weaving, printing and dyeing, Coatings, paints, building materials, Glass coatings, printing
Standards
CIE No.15、GB/T 3978
Steps
1. Turn on the instrument power
2. Measurement parameters set by 3.5 inch Capacitive Touchscreen
3. Align the measurement aperture to the sample to be tested
4. Press the side test button for measurement
5. Check the light spectrum, chromatic value, color difference value and other results displayed on the screen
6. Data management and analysis can be performed by connecting to a computer via a USB interface
Notice
• Operating Ambient Temperature should be kept within the range of 0~ 40 ℃
• Storage Ambient Temperature should be between -20~ 50 ℃
• Avoid use in strong electromagnetic interference environments
• Regularly calibrate instruments to ensure Measurement accuracy
• Avoid measurement diameter contact with corrosion substances
• Clean the measurement window in time after use
