Overview
TS7010 is 3nh using independent spectroscopic core technology research and development of Portable color difference meter, is a high-level color difference meter under the spectroscopic architecture, in addition to ensuring accurate relative value Delta E, but also to ensure the accuracy of absolute values L, A, B for a long time. Measurement can pass international standards and national standards anytime and anywhere. Using built-in silicon photodiode array (dual row 24 groups) sensor, imported whiteboard, Repeatability Delta E * ab easily controlled within 0.1, while taking into account the convenience of Measurement speed and operation, no computer or software can be quickly connected to the color difference measurement judgment, 8mm measurement diameter to meet the plastic electronics, paints inks, Spinning & weaving garment printing and dyeing, printing, ceramics and other industries in the production and quality inspection of accurate color difference control.
Features
8 mm measurement diameter, 10 ° observer angle, can meet the needs of most industry customers;
2. Combination of Full Light spectrum LED Illuminant, Planar Grating Spectroscopic, True Color Capacitive Touchscreen, High starting point configuration;
3, silicon photodiode array (dual 24 groups), display accuracy 0.1, Repeatability is good;
4. Illuminant life 5 years is greater than 3 million measurements, lithium battery 6000 measurements within 8 hours, can be recharged repeatedly and has a long battery life;
Data storage master standard 500, 10,000 samples, fast data search, analysis and comparison.
Principle
The TS7010 color difference meter uses D/8 illumination mode (diffuse illumination, 8 ° direction reception), using a combination of full-spectrum LED Illuminant and planar grating spectroscopy technology to detect reflected light through a silicon photodiode array (dual row 24 group) Sensor, Wavelength range is 400~ 700nm, to achieve SCI measurement. The innovative ETC real-time calibrate technology (Every Test Calibration) has a built-in standard whiteboard to ensure accuracy and Repeatability for each test.
Applications
Plastic electronics, paints inks, Spinning & weaving garment printing, printing, ceramics
Standards
CIE No.15、GB/T 3978、GB 2893、GB/T 18833、ISO7724-1、ASTM E1164、DIN5033 Teil7
Steps
1. Single measurement or average measurement (2 to 99 times);
2. Use the stabilizer to locate the measurement sample;
3. Measurement mode and parameter selection through Capacitive Touchscreen;
4. View the display results, including reflectance, chromatic value, color difference value/graph, pass/fail result, Color simulation, Color bias;
5. Data is automatically stored for quick search and analysis.
Notice
Operating environment: 0~ 40 ℃, 0~ 85% RH (no condensation), altitude below 2000m
Storage environment: -20~ 50 ℃, 0~ 85% RH (no condensation)
• Interface only supports USB charging, not quality control software
• Regularly clean the imported standard whiteboard to avoid yellowing and dirt affecting the accuracy
Make sure the battery is fully charged to maintain long measurement life
