Overview
Automatic Film Applicator is a device used for intermediate coating film in laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate by controlling the Spreader head and Spreader parameters to form the desired film. This Film Applicator is a bar drawdown blade Coater, using bar and drawdown blade two coating methods, with Vacuum chuck function, innovative bar Installation method and clamshell drawdown blade head greatly improve Spreader efficiency, easy to clean, support speed control and application length adjustment, suitable for laboratory High Accuracy automatic film, Moulding proofing in university research institutes, New material, lithium battery, glue, hot-melt adhesive and other laboratories.
Features
1. Surface hard treatment Aluminum alloy countertop, Hardness and wear resistance, Smoothness of countertop is detected by imported High Accuracy instrument
2. Big brand differential regulator, high film thickness control accuracy
3. Clamped Blade Coating Head for Easy Cleaning
4. High Accuracy film applicator, original imported bar film uniform accuracy
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
7. With Vacuum chuck function, suitable for thin film and other soft substrate Spreader
Principle
The Working Principle of Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. Two coating methods, bar and drawdown blade, combined with Vacuum chuck function to fix the substrate, realize High Accuracy automatic film.
Applications
Coatings, inks, paints, Stock, hot-melt adhesives, Lithium batteries, Pressure sensitive adhesives, Resins, Glues, Polymer materials
Steps
1. Prepare samples and substrates
2. Set Spreader parameters (such as application length, Spreader speed) through Touchscreen
3. Select the coating method (bar or drawdown blade) and install the corresponding Spreader head
4. Use Vacuum chuck or fixture to fix the substrate
5. Start the device for automatic filming
6. Clean the Spreader head after the Spreader is completed
Notice
• Make sure that the power supply of the equipment meets the requirements before use (the standard is 220V/50HZ, and 110V/60HZ can be customized)
• Check whether the Vacuum chuck function is normal before Spreader to ensure that the substrate is firmly fixed
• Select the appropriate bar or drawdown blade according to the thickness requirements of the Spreader, and pay attention to the accuracy range
• Spreader cleaning clamshell drawdown blade and bar in time to prevent sample residue
• Follow the equipment specifications during operation to avoid use beyond the range
