Overview
HORIZON DLS-05 Electronic Tensile Tester is a professional testing equipment for Plastic film, composite film tensile strength, fracture elongation, Modulus of Elasticity measurement, as well as disbonding, tearing, heat sealing strength and other performance tests.
Features
1. Operation mode of touch keys, LCD display multiple interfaces in real time
2. It can be pulled off and stopped and maintained at peak value, with overcurrent, overvoltage and overload protection
3. Measurable stretching, heat sealing, disbonding, tearing and other items
4. Can be determined elongation force value, fixed force value to measure elongation, display force value, displacement Linear dispersion
5. Single point speed regulation or stepless speed regulation (1-500mm/min)
60,000 joint adopts cross pin structure, with swing angle limit function to ensure concentricity
7. Control mode closed loop, high control accuracy
Principle
The device precisely controls the stretching process through closed-loop Control mode, uses Sensor measurement of force and displacement, displays test Linear dispersion and data in real time, and realizes various performance tests such as stretching and disbonding.
Applications
Plastic film, composite film
Standards
GB/T13022、GB/T8808、GB 1040、GB/T4850、GB/T 16578、QB/T 2358、QB/T 1130
Steps
1. Connect the power supply and turn it on.
2. Select test methods and parameters
3. Install the specimen and hold it
4. Start testing and observe real-time data
5. View results and Linear dispersion after the test is complete
6. Use the micro printer to output the report
Notice
• Power supply voltage within 220V +/- 10%
• Check whether the fixture is firmly installed before the test
• Avoid Overload Use to Protect Sensors
• Regularly calibrate equipment to ensure Measurement accuracy
• Clean and maintain equipment promptly after use
