Overview
The S60 wireless Bluetooth dissolved oxygen meter is a multi-function measurement device of the BANTE brand, suitable for Android smartphones or tablets. The meter supports dissolved oxygen concentration, BOD, OUR and SOUR Measurement modes. Measurement accuracy is 0.2mg/L, equipped with polarographic Electrode, suitable for a variety of water quality analysis scenarios.
Features
1. High performance wireless Bluetooth dissolved oxygen meter with Polarographic Electrode.
2. Support 1 or 2 point calibrating, using air saturated water or zero oxygen liquid.
3. With salinity and atmospheric pressure compensation function, effectively eliminate measurement errors.
4. Optional test time, start/end DO to calculate oxygen consumption rate (OUR) and specific oxygen consumption rate (SOUR).
5. The data management function provides detailed BOD information, including date/time, temperature, and initial/final DO.
6. Automatic temperature compensation to ensure accurate measurement of the full range.
7. Automatic end point locking, maintaining stable readings for easy browsing and recording.
8. Limit alarm, automatic warning Measured value exceeds the set range.
9. Calibrate expiration reminder prompts the user to calibrate the meter regularly.
10. Password protection against unauthorized calibrating with settings.
11. Multi-Parameter measurement, can connect Bluetooth pH and Conductivity Meter to the device and display Measured value.
12. Reset function, automatically restore the meter to the factory default settings.
Principle
Based on Polarographic Electrode technology, the S60 dissolved oxygen meter ensures data accuracy through measurement of dissolved oxygen concentration in water samples combined with automatic temperature, salinity and atmospheric pressure compensation. Measurement modes including dissolved oxygen, BOD, OUR and SOUR are supported and connected to smart devices via Bluetooth for data transmission and real-time monitoring.
Applications
Water quality monitoring, environment analysis, laboratory research, industrial process control
Steps
1. Turn on the meter and connect Bluetooth to the Android smart device.
2. Select Measurement mode (dissolved oxygen, BOD, OUR or SOUR).
3. Perform 1 or 2 point calibrating using air saturated water or zero oxygen solution.
4. Set compensation parameters (salinity, atmospheric pressure).
5. Start the measurement, you can choose continuous mode or automatic end lock.
6. View and log the data, and use the reset function to restore the default settings if necessary.
Notice
• Measurement accuracy can be ensured by calibrating the meter regularly.
• Avoid use in environments beyond the temperature compensation range (0~ 50 ° C).
• Use password protection to prevent unauthorized changes to settings.
• Make sure the Bluetooth connection is within 10 meters to avoid signal interference.
• Powered by the specified battery type (1.2V lithium battery or 2 AAA batteries).
• Pay attention to limit alarms in the measurement process and adjust parameters in time.
