Overview
The YH1100 Haze Meter (Basic) is a professional test instrument with PD array detectors, which can easily implement ASTM D1003 non-compensated, full light transmitance and haze testing. Its open sample compartment supports vertical and horizontal testing, adapts to a variety of tested samples, and meets the CIE V (lambda) 2 degree Visual Response, compensated measurement to ensure High Accuracy and repeability of light transmitance and haze data.
Features
1. Double standard ISO & ASTM to meet the requirements of different user testing standards
2. Easy to operate, faster and more accurate measurement, equipped with large-size touch operation screen, using PD array detector to achieve High Accuracy measurement
3. Dynamic measurement, Illuminant detectors and temperature sensors monitor Illuminant and environment changes
4. Easy measurement, wide sample adaptation, open measurement area supports vertical and horizontal testing
5. Quality management software, providing strong haze and light transmitance measurement and analysis software, supporting data tabular management and test report generation
Principle
YH1100 haze meter uses transmission illumination mode 0/D (parallel light illumination, diffuse reflection reception), using 400~ 700nm combination LED Illuminant and PD array detector to meet CIE V (lambda) 2 degree visual Response. High Accuracy and repeatability light transmitance and haze data are achieved through compensation method measurement, dynamic monitoring of Illuminant and environment changes to ensure test Reliability.
Applications
Glass Processing, Plastic Processing, Film, Display Processing, Encasement Industry, Liquid Liquid Analysis
Standards
ASTM D1003/1044、ISO 14782、GB/T 2410、JJF 1303-2011、CIE 15.2、JIS K7105、JIS K7361、JIS K 7136
Steps
1. Instrument preheating correction
2. Select the vertical or horizontal Test method to place the sample
3. Measurement parameters set by Touchscreen
4. Start the measurement and complete the test in about 1.5 seconds
5. Check the pass/fail results
6. Output data through USB interface or connect to quality management software
Notice
• Temperature range from 0 to 40 ° C (32 to 104 ° F)
• Storage Temperature range -20~ 50 ° C (-4~ 122 ° F)
• Sample thickness should be less than 170mm
• Make sure the instrument is fully preheated before measurement
• Periodically calibrated for Measurement accuracy
• Power supply with DC 24V, 3A Power Adapter
