Overview
The YH1210 horizontal fog meter is a multifunctional test instrument that can easily implement ASTM D1003 non-compensation method and ISO 13468 compensation method to complete full light transmitter and haze test. Its open sample compartment supports vertical and horizontal test modes to accommodate a variety of tested samples. The instrument uses PD array detectors to meet CIE V (lambda) 2 degree visual Response, and the compensation method ensures High Accuracy and repeatability of light transmitter and haze data measurement.
Features
1. Double standard ISO & ASTM to meet the requirements of different user testing standards
2. Easy to operate, faster and more accurate measurement, equipped with large-size touch operation screen and USB data output device
3. Dynamic measurement, Illuminant detectors and temperature sensors monitor Illuminant and environment changes
4. With compensation port to provide more accurate test results
5. Easy measurement, wide sample adaptation, open measurement area supports vertical and horizontal testing
6. Quality management software, providing powerful haze and light transmitance measurement and analysis functions
Principle
YH1210 fog meter adopts transmission illumination mode 0/D (parallel light illumination, diffuse reflection reception), using 400~ 700nm combination LED Illuminant and PD array detector to meet CIE V (lambda) 2 degree visual Response. High Accuracy light transmitter and haze measurement are realized by compensation method and non-compensation method, and dynamic monitoring system ensures test data Reliability.
Applications
Glass Processing, Plastic Processing, Film, Display Processing, Encasement
Standards
ASTM D1003/1044、ISO 13468、ISO 14782、GB/T 2410、JJF 1303-2011、CIE 15.2、GB/T 3978、ASTM E308、JIS K7105、JIS K7361、JIS K 7136
Steps
1. Instrument preheating correction
2. Select test mode (vertical or horizontal)
3. Place the sample in the measurement area
4. Set parameters through Touchscreen
5. Start measurement (about 1.5 seconds to complete)
6. View and save test results
7. Output data through USB interface
Notice
• The instrument needs to be used within the operating Temperature range of 0~ 40 ℃
• Sample thickness should be less than 105mm
• Preheating correction is required before measurement
• Storage Temperature range -20~ 50 ℃
• Power supply with DC 24V, 3A Power Adapter
• Periodic inspection of Illuminant status, Illuminant life is 5 years greater than 3 million measurements
