Overview
Metering rod is commonly known as coating bar, bar, coating rod, steel wire coating bar, Applicator rod, Applicator rod, grooved rod, Smoothing Rods, gluing rod, Mayer Rod. It is a kind of rod that coatings are evenly distributed on the surface of the substrate through scraping of the rod on paper, film and other substrates and reaches a fixed wet film thickness. This experimental Metering rod is mainly used in laboratory manual Spreader or with Automatic Film Applicator scraping (L400 length).
Features
1. Spreader wet-film 4-190 microns, Miscellaneous model customization;
2. The grooves are not blocked and easy to clean;
3. Spreader accuracy is high and mass control is strict;
4. More than 10 years of service in the field of Spreader;
5. Support customization;
Principle
Coatings are uniformly distributed on the surface of substrates such as paper and film through scraping of rods to achieve fixed wet film thickness.
Applications
Manual Spreader, Automatic Film Applicator
Steps
1. Preparation of Substrate and Coatings;
2. Metering rod placed on the substrate;
3, manually or through the Automatic Film Applicator scraping operation;
4. Coating is evenly distributed and the desired wet film thickness is achieved.
Notice
• Make sure Metering rod is clean and free of blockage before use
• Pay attention to maintain uniform scraping speed during operation
• Clean and maintain in time after use
• Choose the appropriate wet film thickness model according to needs
