Overview
Metering rod is commonly known as coating bar, bar, coating rod, steel wire coating bar, Applicator rod, Applicator rod, grooved rod, Smoothing Rods, gluing rod, Mayer Rod. It is a kind of rod that coatings are evenly distributed on the surface of the substrate through scraping of the rod on paper, film and other substrates and reaches a fixed wet film thickness. This experimental Metering rod is mainly used in laboratory manual Spreader or with Automatic Film Applicator scraping (L400 length).
Features
1. Spreader wet-film 4-190 microns, Miscellaneous model customization;
2. The grooves are not blocked and easy to clean;
3. Spreader accuracy is high and mass control is strict;
4. More than 10 years of service in the field of Spreader;
5. Support customization;
Principle
Coating is uniformly distributed on the surface of the substrate by scraping the rod and achieving a fixed wet film thickness.
Applications
Manual Spreader, Automatic Film Applicator
Steps
1. Manual Spreader or with Automatic Film Applicator;
2. Select the corresponding wet film thickness according to the model;
3. Ensure that the grooves are clean and free of blockage.
4. Uniform scraping makes the Coating distributed.
Notice
• Make sure the grooves are clean and free of blockage before use
• Select the corresponding wet film thickness according to the model
• Scrape evenly to ensure Coating distribution
• Support for custom Miscellaneous models
