Overview
CCT CCT055-L400 coating rod is a Metering rod, commonly known as coating bar, bar, wire coating bar, Applicator rod, Applicator rod, grooved rod, Smoothing Rods, gluing rod or Mayer Rod, used for Coating on paper, film and other substrates by scraping to make the Coating evenly distributed and achieve a fixed wet film thickness. This experimental Metering rod is mainly used for laboratory manual Spreader or scraping with Automatic Film Applicator, with a length of 400mm.
Features
1. Spreader wet film thickness 4-190 microns, support Miscellaneous model customization;
2. The grooves are not blocked and easy to clean.
3. Spreader accuracy is high, mass control is strict;
4. Have more than 10 years of service experience in the field of Spreader;
5. Support customized services.
Principle
Coating rod through the scraping effect of the rod, the uniform Spreader in the paper, film and other substrate surface, to achieve a fixed wet film thickness, to ensure uniform coating distribution.
Applications
Manual Spreader, Automatic Film Applicator
Steps
1. Prepare coating rods and substrates;
2. Coating is applied to the substrate;
3. Use coating rod for scraping to ensure uniform distribution;
4. Spreader after reaching the desired wet film thickness.
Notice
• Make sure the coating rod is clean before use to avoid blockage;
• Select the appropriate wet film thickness model according to needs;
• Pay attention to uniform force during operation to ensure Spreader accuracy;
• Regularly check the status of the coating rod and clean and maintain it in time.
