Overview
Coating rod (model CCT070-L400) is a Metering rod, commonly known as coating bar, bar, steel wire coating bar, etc. Coating is evenly distributed on the surface of paper, film and other substrates by scraping, and a fixed wet film thickness is achieved. This experimental Metering rod is mainly used for laboratory manual Spreader or scraping with Automatic Film Applicator, with a length of 400mm.
Features
1. Spreader wet film thickness range of 4-190 microns, support Miscellaneous model customization;
2. The groove design is not easy to clog and easy to clean.
3. Spreader accuracy is high and mass control is strict;
4. The brand has more than 10 years of service experience in the Spreader field.
5. Support customized services.
Principle
Coating rod scraping action through the rod, the substrate surface uniform distribution, and control the wet film thickness, suitable for laboratory manual or automatic Spreader operation.
Applications
Manual Spreader, Automatic Film Applicator
Steps
1. Prepare coating rods and substrates;
2. Coating is applied to the substrate;
3. Use the coating rod for scraping operation;
4. Coating is evenly distributed and the desired wet film thickness is achieved.
Notice
• Make sure the coating rod is clean before use to avoid blockage;
• Pay attention to control the speed and pressure of the Spreader during operation to ensure accuracy;
• Select the appropriate wet film thickness model according to the application requirements;
• Regular maintenance and cleaning of coating rods to extend service life.
