Overview
CCT CCT100-L400 coating rod is a Metering rod, commonly known as coating bar, bar, Applicator rod, etc. Coating is evenly distributed on paper, film and other substrates by scraping and achieving a fixed wet film thickness. This experimental Metering rod is mainly used for laboratory manual Spreader or with Automatic Film Applicator scraping, the length is L400.
Features
1. Spreader wet film thickness range of 4-190 microns, support Miscellaneous model customization;
2. The grooves are not blocked and easy to clean.
3. Spreader accuracy is high, mass control is strict;
4. Have more than 10 years of service experience in the field of Spreader;
5. Support customized services.
Principle
Coating rod scraping operation through the rod, the uniform distribution of paper, film and other substrate surface, and control to achieve a fixed wet film thickness.
Applications
Manual Spreader, Automatic Film Applicator
Steps
1. Prepare coating rods and substrates;
2. Coating is applied to the substrate;
3. Use coating rod for scraping to ensure uniform distribution;
4. Spreader after reaching the desired wet film thickness.
Notice
• Ensure that the coating rod is clean before use to avoid clogging of grooves;
• Select the appropriate wet film thickness model according to the application requirements;
• Pay attention to safety during operation and avoid scratches;
• Maintain and clean coating rods regularly to maintain accuracy;
• Detailed specifications are required when customizing.
