Overview
CCT CCT150-L400 coating rod is a kind of Metering rod, commonly known as coating bar, bar, coating rod, steel wire coating bar, etc. It is used to spread the coating evenly on paper, film and other substrates and achieve a fixed wet film thickness by scraping. This experimental Metering rod is mainly used in laboratory manual Spreader or scraping with Automatic Film Applicator, with a length of 400mm.
Features
1. Spreader wet film thickness range of 4-190 microns, support Miscellaneous model customization;
2. The grooved design is not clogged and easy to clean.
3. Spreader accuracy is high, mass control is strict;
4. The brand has more than 10 years of service experience in the field of Spreader;
5. Support customized services.
Principle
Coating rod scraping operation through the rod, evenly distributed on the surface of the substrate, and control to achieve a fixed wet film thickness.
Applications
Manual Spreader, Automatic Film Applicator
Steps
1. Prepare coating rods and substrates;
2. Coating is applied to the substrate;
3. Use coating rod for scraping operation;
4. Coating ensure uniform distribution and achieve the desired wet film thickness.
Notice
• Clean the coating rod in time after use to prevent Coating residue from clogging grooves;
• Pay attention to safety during operation and avoid scratches.
• Choose the appropriate wet film thickness model according to actual needs;
• Customized products need to confirm the specifications in advance.
