Overview
Japan OSP-13/400 coating rod is a professional Spreader tool that can Spreader 13 micron wet film thickness with an effective application width of 300mm. The coating rod has 50mm handheld parts at both ends, which can be operated directly without additional handle accessories.
Features
1. Precise control of 13 micron wet film thickness
2.300Mm effective application width
3. 50mm handheld design at both ends, no handle accessories required
4. Made of 304 stainless steel, with strong durability
5. formed production process, mass stability
Principle
The coating rod is made by a formed production process. When used, the operator holds the 50mm portions at both ends, moves the coating rod evenly on the surface of the substrate, and precisely controls the coating to form a 13-micron thick wet-film coating through the gap between the rod body and the substrate.
Applications
Coating Spreaders, laboratory research, mass testing, surface preparation
Steps
1. Spreader Substrate and Coatings
2. Handheld coating rod ends 50mm handheld part
3. Coating Spreader evenly on the substrate surface
4. Keep moving the coating rod at a constant speed to complete the Spreader process
5. Clean coating rod for next use
Notice
• Ensure that the surface of the coating rod is clean and free of contamination before use
• Keep moving at a constant speed during operation to ensure uniform coating
• Avoid bumping damage coating rod surface accuracy
• Clean immediately after use to prevent Coating curing
• Avoid collisions with Miscellaneous tools when storing
