Overview
HUXI LCD top-mounted Stirrer (model RWD50/20030049/20030012) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product adopts LCD display screen and self-locking chuck design, which is capable of high load and long-term continuous work. It has automatic protection function for overload and abnormal conditions to ensure laboratory safety. It is mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LCD screen display, Rotation speed and time can be coarsely adjusted, Working time can be fine-tuned under working conditions
2. Speed range 30-2200rpm, constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm
5. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The LCD top-mounted Stirrer drives the Impeller swirl/spin through a DC brushless motor to realize the mixing of solid-liquid, liquid-liquid or medium and high viscosity samples. The Impeller is fixed with a self-locking chuck, and the torque can be automatically adjusted according to the viscosity of the sample to ensure the mixing effect. When there is an overload, short circuit or abnormal situation, the device will automatically cut off the circuit and alarm to ensure the safety of the experiment.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the appropriate Impeller and install it into the self-locking chuck
2. Connect the power supply and turn on the device switch.
3. Rotation speed and Working time set by LCD screen
4. Stirrer starts working
5. Parameters can be fine-tuned as needed during the working process
6. Turn off the power after the work is completed and clean the equipment
Notice
• Power supply voltage within 100-240VAC range before use
• Ambient Temperature should be maintained between 5 and 40 ° C
• The relative humidity should not exceed 80%
• Impeller should be firmly fixed when installing
• Stop using it immediately when there is a fault display
• Regularly check whether the equipment protection function is normal
• Avoid use under conditions exceeding the maximum viscosity of 10000mPa · s
