Overview
HUXI LCD top-mounted Stirrer (model RWD50/20030093/20030012) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product adopts LCD display screen, has automatic protection function for overload and abnormal conditions, and is capable of high load and long-term continuous work. It is mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LCD screen display, Rotation speed and time can be coarsely adjusted, Working time can be fine-tuned under working conditions
2. Speed range 30-2200rpm, constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm
5. Configure Impeller penetration hole, no need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The Stirrer drives the Impeller swirl/spin with a brushless DC motor to mix solid-liquid, liquid-liquid or medium to high viscosity samples. The Impeller is fixed with a self-locking chuck, Cube lifting clamps ensure stable operation, and torque can be automatically adjusted according to changes in sample viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the right Impeller and install it
2. Adjust the installation position of the stirring rod
3. Rotation speed and Working time
4. Start Stirrer for mixing operations
5. Monitor operating status and fine-tune parameters if necessary
Notice
• Check whether the Power supply voltage meets the requirements of 100-240VAC before use
• Ensure that the Ambient Temperature is within the range of 5-40 ° C
• The relative humidity should not exceed 80%
• Pay attention to the overload protection function, and deal with abnormalities in time
• Select the Right Impeller Type and Size
• Regularly check the chuck protective cover and non-slip pad
• Avoid use under conditions exceeding the maximum viscosity of 10000mPa · s
