Overview
HUXI LCD overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts self-locking chuck and self-developed Cube lifting fixed clip. The product is capable of high load and long-term continuous work. It has automatic protection function for overload and abnormal conditions to ensure laboratory safety. Mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Rotation speed 30-2200rpm, can be constant Rotation speed, high and low speed controllable
3. DC brushless motor, long-term safe operation, outstanding performance
4. Overload and motor protection, in the event of overload, short circuit or abnormality, automatically cut off the circuit and alarm
5. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod
6. The torque can be automatically adjusted according to the change of sample viscosity, which is convenient for experimental operation
7. Various Impellers and Bracket Options
Principle
The LCD top-mounted Stirrer drives the Impeller swirl/spin through a DC brushless motor to achieve mixing of medium and high viscosity liquids. With stepless speed regulation, the torque can be automatically adjusted according to the viscosity of the sample to ensure the mixing effect. In the event of overload, short circuit or abnormal conditions, the system will automatically cut off the circuit and alarm to ensure the safety of the experiment.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the appropriate Impeller and install it into the self-locking chuck
2. Adjust the installation position of the stirring rod without adjusting the installation height of the instrument
3. Rotation speed and time parameters set by LCD screen
4. Start the equipment for mixing operation
5. Turn off the device after the experiment is completed
Notice
• Before use, please check whether the Power supply voltage meets the requirements of 100-240VAC
• Ensure that the Ambient Temperature is within the range of 5-40 ° C and the relative humidity does not exceed 80%
• Pay attention to the use of chuck protective cover and non-slip pad to ensure safe operation
• The device will automatically stop when overload or abnormality occurs, please check the cause of the failure
• Select the appropriate Impeller type based on sample viscosity
• Regularly check the operating status of the equipment to ensure normal operation
