Overview
HUXI LCD top-mounted Stirrer is suitable for mixing medium and high viscosity liquids, which is more high-end and safer than LED series. It adopts self-locking chuck and self-developed Cube lifting and fixing clip for mixing solid-liquid, liquid-liquid or medium and high viscosity samples. The product is capable of high load, long-term continuous work, outstanding performance, automatic protection of overload and abnormal conditions, ensuring laboratory safety.
Features
1. LCD screen display, Rotation speed and time can be coarsely adjusted, Working time can be fine-tuned under working conditions
2. Rotation speed 30-2200rpm, can be constant Rotation speed, high and low speed controllable
3. DC brushless motor, long-term safe operation, outstanding performance
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm to ensure the safety of the experiment
5. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod
6. The torque can be automatically adjusted according to the viscosity of the sample, which is convenient for experimental operation
7. Multiple Impellers and Bracket Available
Principle
The LCD top-mounted Stirrer drives the Impeller swirl/spin with a brushless DC motor to achieve mixing of medium and high viscosity liquids. With stepless speed regulation, the torque can be automatically adjusted according to the viscosity of the sample to ensure efficient mixing. Equipped with self-locking chuck to fix the Impeller, the height is adjusted by Cube lifting clip.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the appropriate Impeller and install to the self-locking chuck
2. Adjust the stirring rod position through the Cube lifting fixing clip
3. Connect the power supply, set Rotation speed and time parameters
4. Start Stirrer for mixing operations
5. After the experiment is completed, turn off the power and clean the equipment
Notice
• Check whether the Power supply voltage meets the requirements of 100-240VAC before use
• Ensure that the Ambient Temperature is within the range of 5-40 ° C and the relative humidity does not exceed 80%
• Impeller installation must be firm to prevent loosening
• The device will automatically stop when overload or abnormality occurs, and the cause of the failure needs to be checked
• Regularly clean Impellers and Chucks to maintain equipment hygiene
• Avoid use in flammable and explosive environments
• Disconnect the power supply when not in use for a long time
