Overview
HUXI LCD Top Stirrer (model RWD100/20030037/20030012) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product features an LCD display with automatic overload and abnormal protection, capable of high load, long-term continuous work, outstanding performance and safety.
Features
1. LCD screen display, Rotation speed and time can be coarsely adjusted, Working time can be fine-tuned under working conditions
2. Speed range 30-2200rpm, constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm
5. Configure Impeller penetration hole, no need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The Stirrer drives the Impeller swirl/spin with a brushless DC motor to achieve mixing of solid-liquid, liquid-liquid or medium and high viscosity samples. The Impeller is fixed with a self-locking chuck, and the Rotation speed is controlled by stepless speed regulation. The torque can be automatically adjusted according to the change of sample viscosity to ensure the mixing effect.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the appropriate Impeller and install it into the self-locking chuck
2. Connect the power supply and turn on the device switch.
3. Rotation speed and Working time set by LCD screen
4. Stirrer starts working
5. Parameters can be fine-tuned as needed during the working process
6. Turn off the power after the work is completed and clean the equipment
Notice
• Power supply voltage within 100-240VAC range before use
• Ensure that the Ambient Temperature is between 5-40 ° C and the relative humidity does not exceed 80%
• Impeller installation should be firm to avoid loosening
• The device will automatically stop when there is an overload or abnormality, please check the reason before using it.
• Regularly check whether the chuck protective cover and non-slip pad are in good condition
• Do not use under conditions exceeding the maximum viscosity of 50000mPa · s
