Overview
The Japanese OSP-42/400 formed coating bar is a professional Spreader tool, which can film the wet film thickness of 42 μm, the effective application width is 300mm, and the total length is 400mm. The product is made of 304 stainless steel, which is suitable for application scenarios where the thickness of the Spreader is precisely controlled.
Features
1. Spreader uniform formed production process
2. Precise 42 μm wet film thickness control
3.300Mm effective application width
4.400Mm total length design
5.304 stainless steel material, durable and anti-corrosion
6. Diameter 10mm, easy to operate
Principle
OSP-42/400 formed coating bar through the formed production process, using the gap between the coating bar and the substrate during the Spreader process to precisely control the wet film thickness to 42 μm. Coating the uniform Spreader on the surface of the substrate during use, the coating bar forms a coating of uniform thickness by mechanical extrusion.
Applications
Coating Spreader, Laboratory R & D, Quality Testing, Industrial Production
Steps
1. Prepare Substrate and Coatings for Spreader
2. Coating evenly on the surface of the substrate
3. Hand-held coating bar scraping Coating surface at proper angle and speed
4. Ensure that the coating bar remains parallel to the substrate to form a uniform coating
5. Clean coating bar for next use
Notice
• Please make sure that the surface of the coating bar is clean and free of impurities before use
• Spreader with uniform force and speed
• Clean in time after use to avoid Coating
• Avoid bumping and scratching surfaces when storing
• If you need to precisely control the wet film thickness, it is recommended to use the supporting calculation tool
