Overview
TS8450 is a Benchtop Colorimeter under the 3nh brand. It adopts 45/0 Optical inspection structure, is equipped with 256 pixel dual array CMOS image sensor and imported whiteboard, and has both Measurement speed and operation convenience. Instrument Repeatability Delta E * ab is controlled within 0.02, Inter-instrument Agreement Delta E * ab is controlled within 0.15, accurate measurement, suitable for laboratory Color accurate analysis and transmission, especially for traffic signs, markings, reflective film luminance factor and chromaticity coordinate measurement, including GB 2893, GB/T 18833 standard colors, support manual custom polygon rectangle tolerance.
Features
1. High hardware configuration: TFT pure color capacitive Touchscreen at 7, Bluetooth 5.0, planar grating spectroscopy.
2.Stable measurement: 256 pixel dual array CMOS image sensor.
3. Color transfer: Measurement of sample reflection and transmission Light spectrum, Lab data is accurate, suitable for color scheme and Color transfer.
4. Measurement accuracy: Built-in temperature sensor to achieve temperature monitoring and compensation to ensure accurate measurement results.
Principle
The TS8450 adopts 45/0 Optical inspection structure, that is, 45 ° annular uniform illumination and 0 ° reception mode, captures Light spectrum data through planar grating spectroscopy and 256 pixel dual-array CMOS image sensor, and the measurement Wavelength range is 400~ 700nm, the interval is 10nm, to achieve accurate Color analysis and transmission.
Applications
Plastic electronics, paints inks, Spinning & weaving garment printing, printing, ceramics, traffic signs, markings, reflective films
Standards
CIE No.15、GB/T 3978、GB 2893、GB/T 18833、ISO7724-1、ASTM E1164、DIN5033 Teil7
Steps
1. Connect the power supply and turn it on.
2. Preheat the instrument and perform calibration.
3. Select Measurement mode (single or average measurement).
4. Place the sample and trigger the measurement.
5. View and record measurement results.
Notice
• Operating Ambient Temperature 0~ 40 ℃, Humidity 0~ 85% RH (no condensation).
• Storage Ambient Temperature -20~ 50 ℃, Humidity 0~ 85% RH (no condensation).
The altitude should be less than 2000m.
• Repeatability measurements after preheating correction.
• Optional Accessories include a micro printer, foot switch and swirl/spin stand.
