Overview
The YS4510 + multifunctional test kit is a 3nh brand grating Colorimeter, which adopts a 45/0 geometrical optics structure (45-degree annular illumination, 0-degree reception) in accordance with CIE No. 15 and a concave grating spectroscopic method, which can accurately measure sample reflectance and various chroma data. Users can customize a single φ 8, φ 4 or φ 2mm measurement diameter according to sample needs, which is used for traffic signs, plastic electronics, paints inks, Spinning & weaving garment printing and dyeing, printing, ceramics and other industries Accurate Color measurement and quality control. The instrument can accurately measure the reflectance data of the sample/fluorescent sample, accurately measure and express various Color difference formulas and Color indices in a variety of Color spaces, realize accurate transmission of Color, and can also be used as a detection device for an accurate color scheme system.
Features
1. Appearance shape is well combined with structural design in line with human mechanics
2.45/0 geometrical optics according to CIE No. 15, GB/T 3978, GB 2893, GB/T 18833, ISO7724/1, ASTM E1164, DIN5033 Teil7
3. Combination LED Illuminant with High Life and Low Power Consumption, Including UV/UV Exclusion (Some Models)
2/4/8 mm single custom caliber can be selected arbitrarily to adapt to more tested samples
5. Light spectrum measurement, Lab data is accurate, can be used for color scheme and accurate Color transfer
6. High electronic hardware configuration: 3.5 inch TFT true color screen, capacitive Touchscreen, concave grating, 256 pixel dual array CMOS detector, etc
7. USB communication mode, wider adaptability
8. Super stain-resistant, stable standard whiteboard
9. Large-capacity storage space, capable of storing more than 20,000 test data
10. Two Standard Observer angles, a variety of Illuminant modes, a variety of color systems, chroma indicators that meet a variety of standards, to meet the needs of various customers for Color measurement
11. PC-side software has powerful functional extensions
12. Built-in master standard polygon tolerance settings and specific traffic sign color gamut, especially suitable for traffic sign luminance factor and chroma performance judgment
Principle
The YS4510 universal Colorimeter uses the 45/0 geometrical optics structure conforming to CIE No. 15 (45 degree ring illumination, 0 degree reception) and concave grating spectroscopy to accurately measure the reflectance data of the sample/fluorescent sample under the 45/0 geometrical optics illumination conditions recommended by CIE. Through the combination LED Illuminant illumination with high lifetime and low power consumption, the concave grating spectroscopy and 256 pixel dual array CMOS detector are used to receive the signal, which can accurately measure the sample Light spectrum and Lab data.
Applications
Traffic signs, plastic electronics, paints inks, Spinning & weaving garment printing, printing, ceramics
Standards
CIE No.15、GB/T 3978、GB 2893、GB/T 18833、ISO7724/1、ASTM E1164、DIN5033 Teil7
Steps
1. YS multifunctional test components should be used with YS series Colorimeter. Before use, YS series Colorimeter should be calibrated for black and whiteboard.
2. Place the YS series colorimeter as shown in the figure. The measurement port of the colorimeter should be connected with the measurement port of the bracket. At the same time, the two base baffle pins should be aligned with the baseplate reference hole of the YS colorimeter. Then hold the push plate against the colorimeter, tighten the screws, and check whether the colorimeter is loose. If it is loose, please be sure to tighten the screws again
3. Load the Cuvette loaded with the sample to be tested into the bracket. Gently push away the swirl/spin platen and gently put it into the Cuvette. The Cuvette is pressed against the measurement port of the instrument while being pressed by the swirl/spin platen. Note that the liquid height in the Cuvette should be greater than the matching height of the test caliber (that is, the sample height reaches more than half a cup)
4. Cover the cover to ensure that the inside of the Cuvette is an all-black environment. After completing the above steps, you can use the YS series colorimeter to perform reflection chromaticity measurement on the sample
Notice
• Before use YS series Colorimeter should be black and white board correction
• When installing the colorimeter, make sure that the measurement port is well connected with the measurement port of the bracket, and the two base baffle pins should be aligned with the baseplate reference hole
• Check whether the colorimeter is loose after tightening the screws. If it is loose, be sure to tighten it again.
• The height of the liquid in the Cuvette should be greater than the matching height of the test caliber (the height of the sample reaches more than half a cup)
• Cover the Cuvette before measurement to ensure an all-black environment
