Overview
QIWEI FS-1100T Disperser (Digital Display High Speed) is a laboratory equipment that integrates dispersion and stirring functions. The motor Power is 1.1KW. The equipment can complete the two processes of dispersion and homogenization in one machine and one container. It has the characteristics of high efficiency, good mixing effect and easy cleaning. It also adopts manual lifting mode, which is simple and convenient to operate. FS-1100T Disperser is widely used in the dispersion and mixing of materials in liquids such as factories, scientific research institutions, Universities & colleges and medical units.
Features
1. Integrating dispersion and stirring functions, one machine and one container complete the dispersion and homogenization process.
2. Adopt digital display technology, electronic constant force speed regulation, digital direct display of shaft Rotation speed.
3. High efficiency, good mixing effect, easy to clean.
4. Adopt manual lifting design, cylindrical strut, press to control the height, simple and convenient operation.
5. According to the relationship between Rotation speed and material viscosity and reaction rate, it can provide process data reference for large-scale production.
6. Standard dispersed impeller and sand disc to adapt to different experimental needs.
Principle
The Disperser adopts an electronic constant force speed control circuit, and the digital direct display of the rotating shaft Rotation speed. Its dispersion head generates a swirl/spin tangential high linear speed under the high-speed drive of the motor, so that the material can withstand strong hydraulic shearing and high-frequency mechanical effects under the action of huge centrifugal force. Fluid materials withstand thousands of shearing and mechanical effects per minute, thus achieving efficient mixing, dispersion and homogenization.
Applications
Factories, Research Institutions, Universities & colleges, Medical Units
Steps
1. Installation: Fix the holder on the frame, fix the stainless steel barrel, and make the barrel cover hole fit with the motor shaft. Connect the five-core aviation plug of the motor and the governor (pay attention to the notch direction), and connect the ground wire.
2. Preparation: Fix the selected sand disc or dispersed impeller with the rotating shaft. Adjust the height position of the rotating shaft and the container, lock the motor seat and the container, put in the material and cover the container.
3. Operation: Turn on the power supply, turn on the switch, and after the display screen is reset to zero, increase or decrease the Rotation speed as needed through the touch button.
4. Maintenance: When the motor brush abrasion is less than 10mm, it should be replaced in time.
Notice
• This machine is a series motor, and the brush will generate sparks during operation, so it is not suitable for use in explosion-proof workshops.
• Rotation speed greater than 4000rpm, should not run empty machine.
• Pay attention to the notch direction of the aviation plug when the motor is connected to the governor.
• Make sure the equipment is reliably grounded before operation.
