Overview
YDX BD60 Thermometric Paper is a single-Color discoloration temperature measurement patch with a Measuring temperature of 60 ° C. The product is equipped with an anti-fouling protective film, which has the functions of dust-proof, anti-fouling, waterproof, oil-proof, etc. After overheating, the window will turn red or black, and the discoloration is permanent and irreversible, and the primary color will not be restored even if the temperature chills down. The specification is 2.5x4 cm/piece.
Features
1. Single Color discoloration temperature sticker, only one temperature point
2. Pressure sensitive adhesive, sticky design
3. With anti-fouling protective film, it has strong waterproof, oil-proof and anti-fouling performance
4. The size is 2.5x4 cm/piece
5. Irreversible temperature patch
6. Normal service life: 3 years indoors, 2 years outdoors
Principle
When the set temperature of YDX BD60 Thermometric Paper reaches 60 ° C, the window will change from white to red or black. This discoloration is permanent, and it will not return to its original state even after the temperature drops. Color changes are used to visually display whether it is over-temperature.
Steps
1. Make sure the pasting part is clean and drying
2. Stick the Thermometric Paper hard and pinch the corners to remove the air gap
3. Avoid touching the patch with your hands during the temperature measurement process
Notice
• The pasting part must be clean and drying
• Do not touch the temperature measurement patch with your hands during the temperature measurement process
• When pasting, stick it firmly, and pinch the corners to eliminate the air gap.
Store at room temperature, away from heat sources, to avoid pricking, folding or scratching
