Overview
Automatic Film Applicator is a device for intermediate coating film in the laboratory, replacing manual film and automatically filming to improve the accuracy and efficiency of film. This Film Applicator is a bar drawdown blade Coater, using bar and drawdown blade two coating methods, external Vacuum chuck pump, innovative bar Installation method and clamshell drawdown blade head greatly improve Spreader efficiency, easy to clean, with speed control and application length adjustment function, suitable for laboratory High Accuracy automatic film, Moulding proofing in university research institutes, New material, lithium battery, glue, Resin and other laboratories.
Features
1. Surface hard treatment Aluminum alloy countertop, Hardness and wear resistance, Smoothness of countertop is detected by imported High Accuracy instrument
2. Big brand differential regulator, high film thickness control accuracy
3. Clamped Blade Coating Head for Easy Cleaning
4. High Accuracy film applicator, original imported bar film uniform accuracy
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
7. With Vacuum chuck function, suitable for thin film and other soft substrate Spreader
Principle
The Working Principle of Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. Two coating methods of bar and drawdown blade, combined with Vacuum chuck to fix the substrate, realize High Accuracy automatic film.
Applications
University research institutes, New materials, Lithium batteries, Glues, Resins, Coatings, inks, paints, Stocks, Pressure sensitive adhesives, Polymer materials, Pharmaceuticals
Steps
1. Prepare the substrate and samples
2. Place the substrate on the Spreader table and fix it with Vacuum chuck or fixture
3. Select the coating method (bar or drawdown blade) and install the corresponding Spreader head
4. Set Spreader parameters (speed, length, thickness, etc.) through Touchscreen
5. Start the device for automatic filming
6. Clean the Spreader head after the Spreader is completed
Notice
• Make sure that the equipment power supply and vacuum pump are connected normally before operation
• Choose the appropriate fixing method (Vacuum chuck or fixture) according to the characteristics of the substrate
• Confirm that the Spreader parameters are set correctly before Spreader
• Clean the Spreader head in time after use to keep the equipment clean
• Customized requirements need to be communicated with the supplier in advance to confirm
