Overview
OSP-150T L250 coating rod is a professional Spreader tool of Japanese OSP brand, with a total length of 250mm and an application width of 250mm. It needs to be used with a handle. This model adopts a K-shaped cogging bottom design, which is suitable for high viscosity Coating and has good leveling, especially suitable for application scenarios with high glue viscosity.
Features
1. K-shaped cogging bottom design, large tooth spacing, suitable for high viscosity Coating.
2. leveling well, Spreader evenly.
The material is 304 stainless steel, which is durable and easy to clean.
4. The application width is 250mm and the total length is 250mm. It needs to be used with a handle and is easy to operate.
Principle
The coating rod is manufactured by a formed production process, and the K shape design at the bottom of the cogging makes the coating evenly distributed during the Spreader process, which is suitable for high viscosity materials. It ensures that the thickness of the Spreader film is 150 μm, and a smooth Spreader effect is achieved.
Applications
Silk, non-woven fabric
Steps
1. Prepare coating rod and install handle (if applicable).
2. Coating evenly on the surface of the substrate.
3. Spreader with coating rod at appropriate pressure to ensure uniform thickness.
4. Clean the coating rod for next use.
Notice
• The coating rod needs to be equipped with a handle to ensure stable operation.
• Suitable for High Viscosity Coatings, avoid using incompatible materials.
• Clean immediately after use to prevent Coating residue.
• Avoid collisions when storing to maintain the cogging shape.
