Overview
OSP-80T L250 coating rod is a Spreader tool of the Japanese OSP brand. The rod length is 250mm and the application width is 250mm. It needs to be used with a handle. The bottom of this model has a K shape and a large tooth spacing. It is suitable for high viscosity Coating and has good leveling. It is especially suitable for applications with high glue viscosity such as silk, non-woven fabrics, etc.
Features
1. The bottom of the cogging is designed with K shape, and the tooth spacing is large, which is suitable for high viscosity Coating.
2. leveling well, Spreader evenly.
The material is 304 stainless steel, which is durable and easy to clean.
4. The rod length is 250mm, the application width is 250mm, and it needs to be equipped with a handle, which is easy to operate.
Principle
The coating rod is manufactured by a formed production process. When used, the Coating Spreader is placed on the surface of the substrate. The cogging structure is used to control the wet film thickness to 80 μm to achieve uniform Spreader. The K-shaped cogging design facilitates the flow and levelling of high viscosity Coatings.
Applications
Silk, non-woven fabric
Steps
1. Prepare coating rod and handle (if applicable).
2. Coating is evenly applied to the substrate.
3. Spreader smoothly along the surface of the substrate with the coating rod, and control the wet film thickness to 80μm.
4. Clean the coating rod for next use.
Notice
• Make sure the coating rod is clean and free of contamination before use.
• Spreader while moving smoothly to avoid unevenness.
• Pay attention to Spreader speed when using High Viscosity Coatings.
• Clean immediately after use to prevent Coating residue.
