Overview
Smart bolt puller KS-10S consists of a manual pump, a hollow hydraulic cylinder, a digital pressure gauge, a high voltage hose with a quick connector, optional parts (anchors, pull rods, adapters) and a portable case. The whole series of hydraulic cylinders are hollow self-reset, digital integrated design, can directly read the force value (KN MPa), and have peak holding, storage, clearing, query and automatic shutdown functions. Excellent technology, simple operation, quality assurance 1 year, especially suitable for laboratory and field use.
Features
1. Intelligent color LCD large screen, easy to learn and get started quickly
2. Load-time Linear dispersion (F-t) and force value (kN) are displayed on the same screen, and the detection process data is completely recorded
3. All stainless steel High Accuracy Sensor, Measurement accuracy 0.5% F.S
4. The peak value of the data is maintained, and the value of the 10-segment fold line is automatically corrected
5. Adopt an overload protection structure to effectively protect the cylinder when the no-load exceeds the range, effectively prolonging the service life
6, Storage capacity, can store 200,000 detection data
7. Optional Bluetooth module
Principle
The instrument adopts the manual pump pressurization mode, generates the tension through the hollow hydraulic cylinder, and the digital pressure gauge directly reads the force value. It has the function of automatic reset, and can perform peak holding and Data storage.
Applications
Testing the pull-out force of various anchors, steel bars (planting bars), expansion bolts, chemical anchors and other anchors, and on-site pull-out force testing of Glass curtain walls (test)
Standards
GB 50367-2013 "Code for Design of Reinforcement of Concrete Structures", GB50330-2013 "Technical Specifications for Building Slope Engineering", JGJ120-2012 "Technical Specifications for Building Foundation Pit Support", CECS 22:2005 "Technical Specifications for Geotechnical Anchors (Cables) ", GB50001-201 "Code for Design of Building Foundation", JGJ145-2013 "Technical Specifications for Rear Anchorage of Concrete Structures", GB 50550-2010 "Code for Construction Mass Acceptance of Building Structure Reinforcement Engineering", GB 50203-2011 "Code for Construction Mass Acceptance of Masonry Structure Engineering"
Steps
1. Connect the manual pump, hydraulic cylinder and digital pressure gauge
2. Install anchors, tie rods and adapters
3. Conduct pull-out resistance testing
4. Read and record data
5. Use peak hold and storage functions
6. Automatic shutdown after completion of detection
Notice
• Check equipment integrity before use
• Avoid no-load exceeding range to protect the cylinder
• Regular charging to maintain battery performance
• Ensure a stable connection when storing data
• Pay attention to safety protection during operation
