Overview
The DDKSIC EC100T is a laboratory Conductivity Meter with a 7-inch touch color screen that supports Multi-Parameter measurements of conductivity, resistivity, TDS, salinity and temperature. The instrument has an intelligent Operating system that provides Electrode Management, Data Management, Automatic calibration and more, and is suitable for a variety of laboratory environments.
Features
1. High-resolution 7-inch oversized touch color screen, beautiful, clear and easy to operate
2. The screen luminance is adjustable, which is convenient for users to use in different environments
3. Temperature unit optional: ° C/° F
4. Intelligent Operating system with Electrode Management, Data Management, Parameter Setting, Data Lock, Automatic calibration and other functions
5.1 point calibrated, reference temperature: 18 ℃, 20 ℃, 25 ℃ optional
6. Switchable measurement to TDS/salinity/resistivity
7. Standard conductivity solution CH, Europe and the United States two optional
8. Automatic identification of calibrated solution, Automatic calibration
9. Support Electrode Calibration, Standard Solution Calibration
10. With power failure protection and factory reset function
11. Data storage: 500 sets
12. Continuous Measurement mode, Interval Timing Measurement mode can be set
13. Data locking function; Support Chinese and English Operating interface
14. Data printing: Support wireless Bluetooth connection to the printer to directly print measurement data (the printer is optional)
15.The data output: U disk/PC/printer
16. Matching: Electrode Frame, Magnetic Stirrer, Standard Solution
17. Dustproof and waterproof grade: IP54
Principle
EC100T Conductivity Meter Electrode measurement solution conductivity and automatic temperature compensation to ensure measurement accuracy. The instrument uses an intelligent system to automatically identify calibrated solutions, supports 1 point Automatic calibration, and can switch measurement TDS, salinity or resistivity parameters.
Steps
1. Connect Electrode and Power
2. Measurement parameters (conductivity, TDS, salinity or resistivity)
3. 1 point Automatic calibration
4. Measurement mode (continuous or interval timing)
5. Start measurement and view data
6. Data storage, printing or output
Notice
• Ensure that the instrument is used under dustproof and waterproof IP54 conditions
• Confirm the standard solution type before calibrating (CH or Europe)
• The printer is Optional accessories and needs to be configured separately
• Check Electrode Status Before Use and Calibrate If Necessary
• Note that the power requirements are DC12V
• Regularly check the function of the instrument and restore the factory settings if necessary
